COMPANY CLAIMED

Dongguan Fengnuo Precision Manufacturing Co., Ltd.

Dongguan Fengnuo Precision Manufacturing Co., Ltd. offers drawing-based metal and plastic components from Dongguan, China. Its published services combine CNC milling, five-axis machining, mill-turn and Swiss-type turning with sheet-metal fabrication, additive manufacturing and polyurethane casting. The emphasis is on prototypes, low-volume orders and complex custom parts rather than catalogue machinery.

Send an Enquiry Official Website
01

Company & strengths

What the published manufacturing scope means for a buyer.

The useful distinction in Fengnuo's offer is the choice between production routes. A slender shaft with cross holes needs a different setup strategy from a multi-face housing or a flexible bellows. Its service pages and component examples provide a basis for discussing that choice, then carrying the drawing requirements through finishing and inspection. Process ownership and any outside finishing should be identified in the manufacturing proposal. [1] [12]

Process choice follows the geometry

The range separates multi-face milling, combined turning and milling, and guide-bushing-supported Swiss turning. This helps a buyer compare the route for housings, rotational parts and small slender components, including how related features remain referenced between operations. [2]

Component examples identify acceptance questions

The published tank-component example discusses datum transfer and a finished sealing groove, while the urethane bellows example focuses on wall distribution and rebound. These details turn a quotation into a discussion of the delivered component's function rather than a comparison of headline precision figures. [11]

CNFX synthesis of the company’s published information.

02

Product & service range

The company supplies custom components and manufacturing services. References to aerospace, medical and automation applications are not evidence that it manufactures complete aircraft, medical devices or automation systems.

Milled metal and engineering-plastic parts

Published milling work includes housings, brackets, plates and multi-surface components. Material options include aluminum, steels, copper alloys, titanium and engineering plastics such as POM, nylon, PC and PEEK. Specify the actual grade, stock condition, critical features and cosmetic surfaces before comparing process proposals. [2]

Turned, mill-turned and Swiss-machined components

Mill-turn work addresses rotational parts with holes, flats, slots and threads. The Swiss service targets small or slender shafts, pins and fittings. Its page publishes a bar diameter up to 32 mm and part length up to 100 mm; suitability still depends on the actual geometry and setup, rather than combining every stated maximum. [4]

Urethane prototypes and flexible components

Silicone-mould polyurethane casting is offered for rigid, clear and rubber-like parts. An ABS-like or PC-like casting resin is not the corresponding production polymer. Specify the resin, hardness, appearance, motion and environment, especially when moving from a visual prototype to a functional small batch. [6]

Formed sheet metal and complementary prototype work

The bending service describes brackets, panels, channels, guards and enclosures, alongside the company's listed laser-cutting and 3D-printing services. For a mixed-process assembly, identify the material thickness, bend references, joining scope and responsibility for externally processed items. [7]

03

Manufacturing workflow

Published processes, organized by production stage.

  1. Review the controlled design

    The quotation process begins with the 2D drawing, 3D model, material, quantity, tolerances and finish. Mark functional datums, mating features and cosmetic surfaces so the engineering review can select an appropriate manufacturing route. [2]

  2. Plan the feature relationships

    Five-axis and mill-turn services emphasise reducing repositioning. Ask how bores, hole patterns, threads and sealing faces will remain referenced through the operations, and which features require a separate setup or inspection. [5]

  3. Finish and inspect the delivered condition

    Published finishes include anodizing, nickel plating, coatings, blasting and polishing. The tank example specifically discusses checking its sealing groove after treatment. Agree masking, coating build and final acceptance dimensions, then the material, in-process and final inspection records required with delivery. [8]

04

Quality & documentation

The published quality workflow links drawing review, material verification, in-process checks and final inspection. Its measurement methods should be translated into a part-specific acceptance plan.

Do not treat one tolerance headline as a universal limit

The general CNC, five-axis and Swiss pages give different figures and conditions. A feasibility response should address the marked features, material, size and finish on the buyer's drawing, followed by an agreed first-article measurement plan. [3]

Choose the inspection method for the feature

The quality page describes CMM inspection for geometry, vision measurement for profiles and hole positions, and optical inspection for small details and surface condition. Reports are offered on request; specify their content, sampling and traceability to the drawing revision before production. [8]

Request the relevant project documents

The site mentions ISO 9001, but a current certificate identifying the holder, site and scope remains a document to obtain. Medical and automotive application labels do not establish approval of a finished device; material, validation and documentation requirements belong in the individual order. [1]

05

What the published component examples show

These examples are presented by Fengnuo on its own website. They describe component geometry and engineering considerations, not independently verified customer outcomes.

Slender shafts with cross holes

The Swiss-machined shaft example combines stepped diameters, a threaded section and small cross holes. Similar projects should establish support during machining, the sequence of secondary features, edge condition and relationships between mating diameters and holes. [9]

7075 aluminum tank-assembly components

The company describes turned and milled components with mounting-hole groups, stepped interfaces and a sealing groove, followed by blasting and black hard anodizing. The important acceptance issues are drawing datums, unclamped geometry and post-finish seal dimensions. This component example does not establish a rated pressure-vessel supply capability. [11]

Flexible polyurethane bellows

The bellows page focuses on corrugation thickness, compression and extension, and rebound. It distinguishes visible shape from validation under temperature and repeated motion. A buyer should define the resin and test conditions that separate an appearance sample from a part intended for service. [10]

06

Is this a fit for your project?

CNFX procurement assessment.

Fengnuo may fit engineering teams comparing prototype and small-batch routes across machined metal, engineering plastics and cast urethane. The useful next step is a drawing-based proposal linking the chosen process to functional features, finishing and inspection, with the supplying location and outside-process responsibilities made explicit.

Prepare a useful enquiry

Design and material
Controlled drawing and model, material grade and condition, datums, mating fits, threads, roughness and cosmetic zones.
Acceptance
Prototype or production intent, quantity, finish and masking, first-article report, material records and functional tests. For urethane, include resin, hardness, movement and environment.
Supply scope
Batch schedule, packing, traceability, outside processing, report format and approval before repeat production.
Discuss your project

Sources & review

Website research · 2026-10-01

Prepared from Fengnuo Precision’s English website. Capability descriptions and application information are company-published; CNFX’s project-fit assessment is editorial analysis. Company claimed indicates profile management, not quality certification. Source methodology.

View 12 key source pages
  1. Company and service scope ↗
  2. CNC processes and materials ↗
  3. Five-axis service and design conditions ↗
  4. Swiss-turning scope ↗
  5. Mill-turn and datum planning ↗
  6. Urethane casting ↗
  7. Sheet-metal bending ↗
  8. Inspection methods and sequence ↗
  9. Multi-hole shaft example ↗
  10. Urethane bellows example ↗
  11. 7075 turn-milled component example ↗
  12. Business contact and company address ↗
Buyer enquiry

Send an enquiry about Dongguan Fengnuo Precision Manufacturing Co., Ltd.

Ask about capability, specification boundaries, lead time, or what this manufacturer would need from you to quote.

Where it goes
Straight to the CNFX editorial desk and to this manufacturer, who manages their own profile here.
Your details stay here
We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman
CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What to include
Share your product requirements, quantity, destination and target delivery date so the request has a clear scope.

Your business information is used only to process this request.

Researching Dongguan Fengnuo Precision Manufacturing Co., Ltd.?

Discuss your product requirements, manufacturing scope and project schedule.

Send an Enquiry
Get QuotesChat