COMPANY CLAIMED
Foshan Greafor Import and Export Co., Ltd. logo

Foshan Greafor Import and Export Co., Ltd.

Foshan Greafor Import and Export Co., Ltd. handles the export offer associated with Foshan Huijing Glass Products Co., Ltd. in Guangdong. The core range is glass blender jars, grinder cups and meat-chopper bowls, supported by matching blades, lids, seals, couplings and OEM appliance sourcing. Its most useful distinction is the combination of a glass-part manufacturing programme with coordinated replacement sets for wholesale buyers.

Send an Enquiry Official Website
01

Company & strengths

What the published manufacturing scope means for a buyer.

The official site identifies Huijing as the glass manufacturer and Greafor as its brand and primary foreign-trade entity. Huijing's published history starts in 2012. The glass catalogue shows different jar openings, threaded bottoms, heights and bowl interfaces rather than one interchangeable container. Complete blenders and meat choppers are also offered through OEM/ODM sourcing; that broader supply range should be separated from the documented glass-manufacturing process when agreeing the producing entity and order scope. [2] [12]

Glass geometry is documented at the interface level

The Huijing catalogue distinguishes capacity, upper opening, threaded bottom diameter, internal opening and height across jar models. This gives a buyer a starting point for checking a replacement against an existing blade base and lid, rather than ordering by appearance or nominal capacity alone. [9]

A coordinated replacement set, not only a jar

The wholesale programme combines jars with blade assemblies, lids, gaskets and drive couplings. For an aftermarket range, this allows the approved bill of materials, component fit, individual packing and replenishment quantities to be discussed as one set. [3]

Sample tooling before bulk tooling

The OEM page separates sample-mould development and sample approval from production-mould preparation and bulk sample confirmation. That sequence is useful for a custom jar or bowl whose bottom structure and mating interfaces must be established before a container-scale order. [4]

CNFX synthesis of the company’s published information.

02

Product & service range

Glass containers are the manufacturing core. Accessories and complete appliances extend the supply programme; their producing works and test documents are order-specific scope items.

Household blender glass jars

A86 is a concrete example: the current product page and published catalogue both list a 1.25 L soda-lime glass jar, with a 128.6 mm top diameter, 69.6 mm bottom outer diameter including thread, 54 mm bottom inner diameter and 200.5 mm height. These dimensions identify that model; they do not establish a universal fit or replace a controlled mating drawing. [5]

Small grinder cups and chopper bowls

The B061 page describes a 300 ml glass grinder cup supplied with or without its lid. The Huijing catalogue also shows HJ-series chopper bowls, including distinct rim, depth and centre-interface arrangements. Treat cups, jars and bowls as different mechanical assemblies when specifying the blade, cover and appliance body. [6]

Blender replacement components and sets

Blades, lids, seals, couplings and jar bases can be coordinated for wholesale programmes. The supplier's brand-reference chart is an identification aid for aftermarket parts, not an original-brand authorization or proof that every model in a brand family accepts the same component. [10]

Custom glass and private-label appliance projects

OEM options cover jar or bowl shape, capacity, bottom structure, wall specification, handles and lid fit, alongside logo and packaging work. Complete blender and meat-chopper projects are also offered through sourcing and coordination. Define which parts are manufactured by Huijing and which are sourced before approving the complete-unit specification. [4]

03

Manufacturing workflow

Published processes, organized by production stage.

  1. Match the actual appliance interface

    Start with the exact appliance model and revision, photos, drawing or a physical sample. Approve the jar, blade base, seal, lid and drive connection together; a matching capacity or brand name is not enough. [10]

  2. Develop and approve the glass design

    The OEM workflow uses sample moulds, proofing and customer confirmation before bulk tooling. Agree dimensional tolerances, sample ownership, tooling changes and the final bill of materials before releasing production. [4]

  3. Form and finish the glass component

    Huijing's published brochure illustrates compounding, melting, moulding, polishing, annealing, bottom cutting, grinding and chamfering, followed by washing, drying, inspection and packing. This is a documented company process description, not a current inventory of machine models or production-line capacity. [9]

  4. Inspect the set and prepare export packing

    The company's Mexico project account describes appearance and dimensional checks, grinding-cup and component matching, quantity verification and protective packing before warehousing. Agree those checks and the packing specification for the purchased configuration. [7]

04

Quality & documentation

The important acceptance questions are glass condition, mating fit, thermal-shock requirements, food-contact documentation and protection during transport. Link each requirement to the actual model and supplied materials.

Thermal-shock conditions must stay model-specific

The A86 webpage lists hot/cold impact checks at 55°C to 0°C and 90°C to 20°C; its brochure gives a different abbreviated thermal-shock description. Specify the actual test procedure, samples, cycles and acceptance criteria in the order. Neither statement should be presented as an unrestricted hot-liquid operating rating. [5]

Obtain the underlying food-contact and system documents

The site refers to ISO 9001, RoHS, LFGB and FDA-related documentation, but the available composite certificate image does not establish readable current scope and validity for each product. Request the original model/material-specific reports and the manufacturing entity's current management-system certificate as appropriate to the destination market. [11]

Batch consistency includes packaging and parts allocation

For matched sets, inspection should connect the approved glass geometry with the correct lid, seal, blade and packing allocation. The supplier's published project workflow includes these checks before container loading, rather than treating quantity and carton protection as unrelated logistics details. [7]

05

Published supply example and buyer fit

The following project is a company-published account, not an independently audited customer result.

Mexico jar-set programme

A 20 September 2026 factory update describes production of two 40HQ container-equivalent orders of glass jar sets with matching grinding cups, plus additional bulk components. The reported stage was final inspection and pre-shipment preparation, not confirmed delivery. Its useful lesson for a similar enquiry is to agree complete-set contents, component quantities and packing before the order reaches warehousing. [7]

06

Is this a fit for your project?

CNFX procurement assessment.

Greafor is relevant to importers, spare-parts wholesalers and appliance brands sourcing glass containers with coordinated mating components. Custom-mould and private-label work should begin with an approved sample and a model-specific packing plan. Published order quantities differ by item: the wholesale page and A86 list 5,000 pieces per model, while B061 lists 2,000; obtain the quantity and tooling basis for the actual selection.

Prepare a useful enquiry

Identify the assembly
Exact appliance/model revision, jar or bowl code, drawing or sample, capacity and mating dimensions; identify whether the request is a glass part, a complete replacement set or an appliance.
Define manufacturing and tests
Glass/material specification, mould changes, lid/seal/blade/coupling bill of materials, sample approval, food-contact reports and thermal-shock method; name the manufacturing and contracting entities.
Plan the wholesale shipment
Quantity per model and replenishment forecast, private-label artwork, individual/carton packing, breakage acceptance and destination; confirm MOQ and lead time for that configuration.
Discuss your project

Sources & review

Website research · 2026-10-01

Prepared from Greafor / Huijing Glass’s English website. Capability descriptions and application information are company-published; CNFX’s project-fit assessment is editorial analysis. Company claimed indicates profile management, not quality certification. Source methodology.

View 12 key source pages
  1. Greafor and Huijing relationship ↗
  2. Glass manufacturing focus ↗
  3. Wholesale component sets ↗
  4. OEM glass and appliance sourcing ↗
  5. A86 glass jar dimensions and test descriptions ↗
  6. B061 small grinder cup ↗
  7. Mexico sets at final-inspection stage ↗
  8. Technical download index ↗
  9. Huijing glass product brochure, 18 pages ↗
  10. Aftermarket compatibility reference, one page ↗
  11. Published certificate montage ↗
  12. Current public business contact ↗
Buyer enquiry

Send an enquiry about Foshan Greafor Import and Export Co., Ltd.

Ask about capability, specification boundaries, lead time, or what this manufacturer would need from you to quote.

Where it goes
Straight to the CNFX editorial desk and to this manufacturer, who manages their own profile here.
Your details stay here
We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman
CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What to include
Share your product requirements, quantity, destination and target delivery date so the request has a clear scope.

Your business information is used only to process this request.

Product spotlights: Foshan Greafor Import and Export Co., Ltd.

Explore this manufacturer’s products, applications and project opportunities.

Researching Foshan Greafor Import and Export Co., Ltd.?

Discuss your product requirements, manufacturing scope and project schedule.

Send an Enquiry
Get QuotesChat