WanHan offers modified engineering-plastic pellets. The company’s submitted Nylon Plastic website also describes mold development, injection molding and prototype/CNC routes; define whether the purchase is material, tooling or finished parts.
What the published manufacturing scope means for a buyer.
Guangdong Wanhan New Material Technology Co., Ltd. identifies Huizhou as its location and describes formulation development, compounding and physical-property testing. The company history traces earlier team and production activity to 2005 and names a Dongguan entity in a later period. Those dates are not presented here as the incorporation date of the current Guangdong entity. [1] [2]
The company lists PA6, PA66, PBT, PP, PC, PC/ABS and ABS, with reinforcement and functional modifications across the catalogue. Availability must be confirmed for the specific polymer and grade rather than assuming every modification exists in every resin. [1]
PA66-WHG30A is the published 30% glass-fiber PA66 injection-molding example. This gives buyers a grade identifier against which to request the current TDS, samples and production specification. [3]
Nylon Plastic describes material selection, custom compounding, mold development, injection molding, CNC machining and prototyping. This submitted business scope is added to the existing WanHan profile. Define the contracting entity, production route and inspection responsibility for a finished-part order. [4]
CNFX synthesis of the company’s published information.
The original compound and PA66-WHG30A evidence is retained below. Newly submitted Nylon Plastic services are identified separately so that pellet data are not presented as guaranteed finished-part properties.
The catalogue offers glass-fiber, flame-retardant and other modified polyamides. Define load, moisture exposure, temperature and molding requirements before choosing the exact formulation. [1]
The product page reports 175 MPa tensile strength to ISO 527-2, 7,000 MPa flexural modulus to ISO 178, and density 1.38 g/cm³ to ISO 1183 as typical values. Request conditioning, specimen and test details in the current TDS; these are not guaranteed finished-part properties. [3]
WanHan lists PBT, PC, PC/ABS and ABS as well as PP. Request an exact grade comparison when changing polymer families; a catalogue category alone supplies no replacement specification. [1]
Nylon Plastic describes drawing and DFM review covering parting lines, draft, wall sections, gates, cooling, ejection, shrinkage and appearance requirements. Tool design, sample review and ownership/maintenance arrangements should be agreed for the part and production programme. [6]
The service page describes prototype, bridge-tool and production-tool routes, with mold trials and first-article review before a controlled production basis. Quote the part drawing, chosen formulation, critical features and approved sample together. [7]
The submitted website offers CNC machining, 3D printing and prototyping alongside molding. These are development and manufacturing routes to be compared against geometry, quantity and validation needs, rather than one default route for every component. [4]
Keep the original grade qualification route for pellets. For a finished-part enquiry, the submitted Nylon Plastic pages add tool development, sample approval and production inspection.
Provide the part drawing, wall thickness, load, operating temperature, chemical and moisture exposure, colour and current-material issue. [3]
Request the grade TDS and sample material. The GF30 page calls for moisture control before molding and evaluation of gate position, fiber orientation, shrinkage and warpage on the actual tool. [3]
Agree the approved grade, colour, packaging, acceptance tests and handling instructions after sample validation. The reviewed GF30 page lists 25 kg bags and palletised shipment as an available arrangement. [3]
Review datums, critical dimensions, appearance areas, material, estimated volume and mold concept. Agree tooling ownership, storage, changes and maintenance before releasing the tool programme. [6]
The injection-molding page describes trials, first-article inspection and controlled drawing/material/process information. Define which dimensional, appearance, functional and traceability records are needed; automotive submission documents require project agreement. [7]
Inspection, testing and project documentation.
The reviewed GF30 page lists an HDT of 220°C under ISO 75-2/B. This is a heat-deflection test result, not a continuous service-temperature approval for a finished part. Ask for the full test conditions and application validation. [3]
The PA66-WHG30A property table states that UL 94 flammability is not specified. A buyer requiring a flame rating should request a suitable grade and evidence covering the required colour and thickness. [3]
The website claims ISO 9001, ISO 14001, ISO 45001 and IATF 16949 systems. Certificate holder, site and validity were not independently verified here. Material compliance and customer approval must cover the selected production grade. [3]
The Nylon Plastic injection-molding page describes inspection against the approved drawing, critical features and material/process basis. First-article results and any requested PPAP elements should be agreed in the quotation; these are not automatically supplied for every order. [7]
Applications listed for the reviewed GF30 grade; suitability remains dependent on part design and validation.
WanHan lists fans, shrouds, brackets, pump housings and industrial components. Validate the actual loads, weld lines, insert regions and dimensional requirements with molded samples. [3]
Connector bodies, supports and appliance frames are listed applications. Electrical, thermal and flame requirements need to be specified separately; a listed use does not constitute product approval. [3]
CNFX procurement assessment.
Use the original compound scope for grade sourcing and molding trials. Use the newly submitted Nylon Plastic service scope when the requirement includes tooling or finished parts, and agree the contracting entity, approved drawing, material formulation and inspection responsibilities before production.
Website research · 2026-10-10
Prepared from Guangdong Wanhan New Material Technology Co., Ltd. / Nylon Plastic’s English website. Capability descriptions and application information are company-published; CNFX’s project-fit assessment is editorial analysis. Company claimed indicates profile management, not quality certification. Source methodology.
Ask about capability, specification boundaries, lead time, or what this manufacturer would need from you to quote.
Discuss your product requirements, manufacturing scope and project schedule.
Send an Enquiry