FYID supplies orbital welding and tube preparation systems. Match the power source and head to tube diameter, wall thickness, joint geometry and available clearance.
What the published manufacturing scope means for a buyer.
The FYID-Feiyide website presents closed-head and open-head orbital welding, tube-to-tubesheet equipment and pipe preparation tools. Its contact page lists No. 269 Hexie Road, Tuanfeng County, Huanggang, Hubei. This profile corresponds to the application submitted as Hubei Feiyide Intelligent Equipment Co., Ltd. The application distinguishes the team’s earlier history from the Hubei legal entity; no legal founding date is asserted here without a registration record. [1] [2]
The FXT20 product page separates six C-series heads rather than treating the family’s total diameter range as the capacity of a single head. The C5 covers 6.35–12.7 mm OD; the C170 covers 50.8–168 mm OD. Wall limits also change with the head. [4]
The FXT20 C-series description includes a built-in printer and USB weld-data export. Buyers should specify joint identifiers, record fields and file requirements before accepting the system for a documented welding programme. [4]
CNFX synthesis of the company’s published information.
Published equipment families; final compatibility depends on the selected source, head and workpiece.
The published standard family range is tube OD 6.35–168 mm and wall thickness 0.5–3 mm, distributed across six heads. OD 3.175 mm is outside the standard range and requires separately confirmed customisation. [4]
The company overview lists open-head configurations for OD 20–325 mm. Request the head-specific wall limits, required access and procedure for the proposed joint. [1]
The overview distinguishes PT40/PT80 tube-to-tubesheet equipment and U-bend heads. Send the exchanger drawing, tube pitch, protrusion and access envelope for a configuration review. [1]
The published catalogue includes planetary pipe cutters, split-frame cutting and beveling, and tube-facing equipment. Match the preparation tool to the material and joint preparation required by the welding procedure. [1]
FYID lists this as a separate MIG line for large pipe, OD 219 mm and above. It should not be specified as an FXT20 orbital TIG configuration. [1]
These are the manufacturer’s selection and quotation steps; they do not establish an independently audited manufacturing process.
Provide OD, wall thickness, material, joint type, quantity and drawings showing access restrictions. Include the destination and electrical supply. [2]
FYID describes its welding power sources as air-cooled. The FXT20 C5 head is air-cooled; C10, C40, C80, C120 and C170 are water-cooled. Specify the complete system instead of calling the entire assembly air- or water-cooled. [4]
Confirm shielding gas, joint preparation, operator training and the welding procedure for the actual material. High-purity or pharmaceutical use does not by itself establish compliance with a project’s weld acceptance requirements. [4]
Inspection, testing and project documentation.
The FXT20 power source is listed at 100% duty cycle at 155 A, while the listed current range extends to 200 A. Do not read the maximum current as a continuous-duty rating. Head and operating conditions must be included in selection. [4]
FYID’s quality page asks buyers to confirm certification against the exact model and order. Documents for one welding line should not be extended to pipe cutters or the separate MIG line. Certificate originals and validity were not independently checked for this profile. [3]
Applications described by FYID; qualification of the delivered joint remains project-specific.
The C-series page describes pharmaceutical, sanitary and semiconductor tubing applications. Material preparation, shielding and a qualified procedure determine whether the finished joint meets the buyer’s requirements. [4]
Tube-to-tubesheet and U-bend heads address different access and joint geometries from straight tube butt welding. Submit the actual assembly drawing before selecting a head. [1]
CNFX procurement assessment.
A relevant shortlist candidate for buyers who can define a tube joint and need a matched orbital welding and preparation package. Request a configuration-specific offer and sample-weld acceptance plan; the published family maximums are not a promise that every head covers every listed joint.
Website research · 2026-10-09
Prepared from FYID / Hubei Feiyide Intelligent Equipment Co., Ltd.’s English website. Capability descriptions and application information are company-published; CNFX’s project-fit assessment is editorial analysis. Company claimed indicates profile management, not quality certification. Source methodology.
Ask about capability, specification boundaries, lead time, or what this manufacturer would need from you to quote.
Discuss your product requirements, manufacturing scope and project schedule.
Send an Enquiry