Product Nozzle / Spout: Temperature Range 0-140°C

Component Specifications

Definition

A critical component of aseptic filling valve assemblies designed to precisely control and direct the flow of sterile liquid products into containers while maintaining sterility throughout the filling process. The nozzle ensures accurate dosing, prevents contamination, and maintains product integrity during high-speed filling operations.

Working Principle

Operates through controlled pneumatic or mechanical actuation to open and close the flow path. When activated, sterile product flows through the nozzle's precisely engineered orifice, creating a laminar flow pattern that prevents air entrapment and ensures accurate volume dispensing. The nozzle maintains sterility through steam-in-place (SIP) or clean-in-place (CIP) sterilization capabilities.

Materials

316L stainless steel (primary), PTFE seals, ceramic wear surfaces, FDA-compliant elastomers

Technical Parameters

Parameter	Typical range	Notes & selection driver
Accuracy	±0.5% of target volume
Flow Rate	50-500 mL/sec
Surface Finish	Ra ≤ 0.4 μm
Orifice Diameter	2-10 mm
Temperature Range	0-140°C
Operating Pressure	0.5-6 bar
Sterilization Cycles	≥ 5000

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2852, ISO 14159, DIN 11864, FDA 21 CFR Part 211

Parent Products

This component is used in the following industrial products

Aseptic Filling Valve Assembly

A critical assembly that precisely controls the flow of hot, sterile beverage into bottles while maintaining aseptic conditions during the filling process.

View Product Details

Engineering Analysis

Risks & Mitigation

Contamination risk if seals degrade
Dosing inaccuracy from wear
Product leakage from improper installation
Corrosion from aggressive cleaning agents

FMEA Triads

Trigger: Seal material degradation
Failure: Sterility breach and product contamination
Mitigation: Regular preventive maintenance, use of FDA-approved materials, scheduled seal replacement

Trigger: Orifice wear from abrasive products
Failure: Inaccurate dosing and product giveaway
Mitigation: Implement ceramic-coated surfaces, regular calibration checks, product filtration

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.1 mm on critical dimensions, Ra ≤ 0.4 μm surface finish

Test Method

Pressure decay test for integrity, microbial challenge testing, gravimetric accuracy verification, material certification to FDA/EC1935 standards

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Product Nozzle / Spout

Manufacturer profiles associated with Product Nozzle / Spout.

Sourcing Product Nozzle / Spout from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Port Flanges

Precision-machined flanges for connecting beverage metering pump heads to piping systems with leak-proof seals.

Valve Stem and Seat

Precision sealing component for aseptic filling valves that controls sterile product flow in beverage manufacturing.

Orienting Rails/Guides

Precision alignment components that guide and orient bottles in unscrambling systems for proper positioning.

Frequently Asked Questions

What maintenance is required for aseptic filling nozzles?

Regular cleaning cycles (CIP/SIP), inspection for wear on sealing surfaces, calibration checks for dosing accuracy, and replacement of elastomer components per manufacturer recommendations.

How do I select the right nozzle size for my application?

Consider product viscosity, target fill volume, required fill speed, container opening size, and sterility requirements. Consult manufacturer flow charts and conduct trials with product samples.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Product Nozzle / Spout