Lid / Manway: Temperature Range -40°C to 200°C

Component Specifications

Definition

A lid or manway is a critical safety and access component on chemical storage tanks, designed to seal the tank opening to prevent leaks, contain pressure, and allow for inspection, cleaning, and maintenance. It typically consists of a cover, gasket, and fastening mechanism (e.g., bolts, clamps) to ensure a tight seal against chemical exposure and environmental factors.

Working Principle

The lid/manway operates by creating a pressure-tight seal using a gasket and fastening system, preventing chemical leakage and maintaining tank integrity. It may include safety features like pressure relief valves or locking mechanisms to control access.

Materials

Stainless steel (e.g., SS316L for corrosion resistance), carbon steel with coatings, or specialized alloys (e.g., Hastelloy, titanium) depending on chemical compatibility. Gaskets are often made from PTFE, EPDM, or Viton.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Weight	5kg to 50kg
Diameter	300mm to 1000mm
Seal Type	Bolted or clamped
Pressure Rating	Up to 10 bar
Temperature Range	-40°C to 200°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 14122, ASME B16.5, DIN 28011

Parent Products

This component is used in the following industrial products

Chemical Storage Tank

A chemical storage tank is a specialized vessel used in chemical manufacturing to store liquid or powdered chemicals before they are precisely metered and injected into a process stream by a chemical dosing system.

View Product Details

Engineering Analysis

Risks & Mitigation

Chemical leakage due to seal failure
Pressure buildup causing explosion
Corrosion from aggressive chemicals
Human error in improper closure

FMEA Triads

Trigger: Gasket degradation from chemical exposure
Failure: Leakage of hazardous chemicals
Mitigation: Use chemical-resistant gaskets and regular inspection

Trigger: Improper bolt tightening
Failure: Inadequate seal leading to pressure loss
Mitigation: Implement torque specifications and training

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Seal flatness within 0.1mm, bolt torque ±10%

Test Method

Pressure testing per ASME Section VIII, leak detection with helium or soap bubble test

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Lid / Manway

Manufacturer profiles associated with Lid / Manway.

Sourcing Lid / Manway from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

RTD Temperature Sensor

High-precision platinum-based temperature sensor for industrial chemical heating systems

Safety Enclosure & Ventilation

Safety enclosure and ventilation system for automated chemical storage and retrieval systems, designed to contain hazardous materials and maintain safe air quality.

Management Software License

Digital license enabling access to management software for automated chemical drum labeling and tracking systems.

Polymer backbone

The primary molecular chain in high-purity industrial adhesive base resins that determines structural integrity and bonding properties.

Frequently Asked Questions

What is the difference between a lid and a manway?

A lid is a simple cover, while a manway includes a larger, accessible opening for personnel entry, often with safety features like handrails or ladders.

How often should a chemical tank lid be inspected?

Inspect every 6-12 months for corrosion, gasket wear, and seal integrity, or as per regulatory and operational guidelines.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Lid / Manway