INDUSTRY COMPONENT

Modulator IC

Modulator IC is an integrated circuit that modulates signals for transmission in electronic communication systems.

View Specifications

Component Specifications

Definition
A Modulator Integrated Circuit (IC) is a semiconductor device designed to perform modulation functions in electronic systems, typically converting baseband signals into modulated carrier signals suitable for transmission. It integrates multiple functional blocks including oscillators, mixers, amplifiers, and control circuits on a single chip to achieve efficient signal processing with minimal external components.
Working Principle
The Modulator IC operates by combining an information-carrying baseband signal with a high-frequency carrier wave through modulation techniques such as amplitude modulation (AM), frequency modulation (FM), or phase modulation (PM). This process shifts the frequency spectrum of the baseband signal to a higher frequency band suitable for transmission through various media while maintaining signal integrity and minimizing interference.
Materials
Silicon semiconductor substrate with doped regions, metal interconnects (typically aluminum or copper), dielectric layers (silicon dioxide or low-k materials), and protective packaging (epoxy resin or ceramic).
Technical Parameters
  • Output Power -10 dBm to +20 dBm
  • Package Type QFN, SOP, BGA
  • Supply Voltage 3.3V to 5V
  • Frequency Range 1 MHz to 6 GHz
  • Modulation Type AM/FM/PM/QAM
  • Power Consumption 10 mW to 500 mW
  • Operating Temperature -40°C to +85°C
Standards
ISO 9001, IEC 60747, JEDEC JESD22

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Modulator IC.

modulator IC integrated circuit signal modulation communication IC RF modulator AM modulator FM modulator electronic component transmitter circuit Modulator IC in Computer, Electronic and Optical Product Manufacturing

Parent Products

This component is used in the following industrial products

Transmitter Circuit Board

Electronic circuit board that generates and transmits radio frequency signals in a remote control device.

View Product Details

Engineering Analysis

Risks & Mitigation
  • Electrostatic discharge damage
  • Thermal overstress
  • Frequency drift
  • Signal distortion
  • Electromagnetic interference
FMEA Triads
Trigger: Excessive thermal load
Failure: Performance degradation or complete failure
Mitigation: Implement proper heat sinking and thermal management
Trigger: Voltage spikes or ESD events
Failure: Permanent damage to semiconductor junctions
Mitigation: Use ESD protection circuits and proper handling procedures
Trigger: Improper impedance matching
Failure: Signal reflection and power loss
Mitigation: Design proper matching networks and use impedance-controlled PCB layouts

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance
±5% for frequency stability, ±2 dB for gain variation
Test Method
Vector network analysis, spectrum analysis, bit error rate testing, temperature cycling

Buyer Feedback

★★★★☆ 4.6 / 5.0 (34 reviews)

"Found 48+ suppliers for Modulator IC on CNFX, but this spec remains the most cost-effective."

"The technical documentation for this Modulator IC is very thorough, especially regarding technical reliability."

"Reliable performance in harsh Computer, Electronic and Optical Product Manufacturing environments. No issues with the Modulator IC so far."

Related Components

Storage Module
Industrial-grade storage module for data logging and firmware in IoT gateways
Ethernet Controller
Industrial Ethernet controller for real-time data transmission in Industrial IoT Gateways.
Serial Interface
Serial interface for industrial data transmission between IoT gateways and legacy equipment using RS-232/422/485 protocols.
I/O Connectors
Industrial I/O connectors are ruggedized interfaces that enable reliable data and power transmission between sensors, actuators, and Industrial IoT Gateways in harsh environments.

Frequently Asked Questions

What is the main function of a Modulator IC?

The primary function is to convert baseband signals into modulated carrier signals for efficient transmission in communication systems.

What types of modulation can Modulator ICs perform?

They can perform various modulation types including amplitude modulation (AM), frequency modulation (FM), phase modulation (PM), and quadrature amplitude modulation (QAM).

What are common applications of Modulator ICs?

Common applications include radio transmitters, television broadcasting systems, wireless communication devices, radar systems, and industrial telemetry equipment.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Get Quote for Modulator IC

Modulation Input Stage Module Housing