Peeling Blade/Edge: Thickness 0.5-2.0 mm

Q: How often should a peeling blade be replaced?

Typically every 50,000 to 200,000 cycles, depending on tape material and blade quality. Inspect regularly for wear, chipping, or dullness.

Q: What causes premature blade wear?

Abrasive tape coatings, misalignment, excessive tension, or using the wrong blade angle for the tape type.

Component Specifications

Definition

A specialized cutting component in cover tape peelers that precisely severs the adhesive cover tape from carrier tape during the automated feeding of surface-mount electronic components, ensuring component integrity and preventing contamination.

Working Principle

The peeling blade uses a sharp, precisely angled edge to initiate and propagate a clean cut along the seam between the cover tape and carrier tape. As the tape advances, the blade applies controlled shear force to separate the layers without damaging the components housed in the carrier pockets.

Materials

High-carbon tool steel (e.g., AISI D2, SKD11) or tungsten carbide, often coated with titanium nitride (TiN) or diamond-like carbon (DLC) for wear resistance and reduced friction.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Hardness	58-62 HRC (steel), 85-92 HRA (carbide)
Thickness	0.5-2.0 mm
Blade Angle	30-45 degrees
Edge Radius	< 10 microns
Operating Temperature	Ambient to 60°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 9001, IEC 61191-2

Parent Products

This component is used in the following industrial products

Cover Tape Peeler

A component within a component feeder that removes the protective cover tape from carrier tapes containing electronic components.

View Product Details

Engineering Analysis

Risks & Mitigation

Blade dulling leading to tape tearing
Misalignment causing component damage
Contamination from adhesive residue
Injury during handling or replacement

FMEA Triads

Trigger: Improper installation or misalignment
Failure: Incomplete tape separation or component damage
Mitigation: Follow manufacturer alignment procedures; use calibration tools.

Trigger: Material fatigue or abrasive wear
Failure: Blade chipping or dulling, causing tape jams
Mitigation: Implement preventive maintenance schedules; use coated blades for longer life.

Industrial Ecosystem

Compatible With

Universal Instruments GSM, Fuji NXT, Panasonic CM, ASM SIPLACE

Typical Suppliers & Equivalents

3M, TE Connectivity, Murata, YAMAHA

Compliance & Inspection

Tolerance

±0.05 mm on critical dimensions

Test Method

Visual inspection under magnification; tape separation efficiency test per manufacturer specs

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Peeling Blade/Edge

Manufacturer profiles associated with Peeling Blade/Edge.

Sourcing Peeling Blade/Edge from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Dielectric Layer

Insulating layer in surface mount capacitors that stores electrical energy through polarization.

Optical Window

Transparent optical component for light transmission in polycarbonate lens housings

PCB Substrate

PCB substrate is the foundational insulating layer that provides mechanical support and electrical connectivity for electronic components in high-speed memory modules.

Edge Connector

Edge connector is a printed circuit board (PCB) connector that mates with the edge of another PCB, commonly used in high-speed memory modules for reliable electrical connections.

Frequently Asked Questions

How often should a peeling blade be replaced?