Reflective Surface: Diameter 50-200 mm, Thickness 3-10 mm

Component Specifications

Definition

A reflective surface is a critical optical component within a Precision Reflector Assembly, engineered to achieve high reflectivity and minimal distortion for precise control of light beams. It functions by reflecting incident light at specific angles, maintaining beam integrity and directionality essential for applications requiring accurate optical alignment and measurement.

Working Principle

Operates on the principle of specular reflection, where incident light rays strike the surface and are reflected at an angle equal to the angle of incidence, governed by the law of reflection. The surface's flatness, coating, and material properties determine reflectivity, wavelength specificity, and minimal scattering.

Materials

Typically made from substrates like borosilicate glass, fused silica, or aluminum, coated with high-reflectivity layers such as protected aluminum, enhanced aluminum, gold, or dielectric coatings. Coatings are optimized for specific wavelength ranges (e.g., UV, visible, IR).

Technical Parameters

Parameter	Typical range	Notes & selection driver
Diameter	50-200 mm
Thickness	3-10 mm
Coating Type	Enhanced Aluminum
Reflectivity	>95% at specified wavelength
Surface Flatness	λ/10 to λ/20
Surface Roughness	<10 nm RMS
Operating Temperature	-20°C to 80°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 10110, ISO 14999, DIN 3140

Parent Products

This component is used in the following industrial products

Precision Reflector Assembly

A precision reflector assembly is a critical optical component used in professional and industrial lighting equipment to control light distribution, intensity, and beam patterns.

View Product Details

Engineering Analysis

Risks & Mitigation

Surface contamination reducing reflectivity
Mechanical damage from handling
Coating degradation due to humidity or UV exposure
Thermal expansion affecting flatness

FMEA Triads

Trigger: Improper cleaning or exposure to contaminants
Failure: Reduced reflectivity and increased scattering
Mitigation: Use lint-free wipes and approved solvents; store in controlled environments.

Trigger: Thermal stress from temperature fluctuations
Failure: Surface deformation or coating delamination
Mitigation: Design with low-expansion materials; operate within specified temperature ranges.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Surface flatness within λ/10, reflectivity >95% per ISO 10110

Test Method

Interferometry for flatness, spectrophotometry for reflectivity, visual inspection per ISO 14999

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Reflective Surface

Manufacturer profiles associated with Reflective Surface.

Sourcing Reflective Surface from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Serial Interface

Serial interface for industrial data transmission between IoT gateways and legacy equipment using RS-232/422/485 protocols.

Marking Ink

Specialized ink for permanent identification on surface mount resistors during manufacturing.

Dielectric Layer

Insulating layer in surface mount capacitors that stores electrical energy through polarization.

Optical Window

Transparent optical component for light transmission in polycarbonate lens housings

Frequently Asked Questions

What is the difference between a reflective surface and a standard mirror?

A reflective surface is engineered for high precision, with controlled flatness, specific coatings, and minimal distortion, unlike standard mirrors which may have lower accuracy and broader tolerances.

How do I choose the right coating for a reflective surface?

Select based on the wavelength range (e.g., aluminum for visible light, gold for IR), environmental conditions, and required reflectivity; consult specifications for optimal performance.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Reflective Surface