Editorial Technical Reference

Ethernet Interface

This page explains how Ethernet Interface is classified within Computer, Electronic and Optical Product Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.

Technical Definition & Core Assembly

A hardware component that provides Ethernet connectivity for data communication in industrial automation systems.

View Full Specifications Explore Manufacturing Sources

Product Specifications

Technical details and manufacturing context for Ethernet Interface

Definition
The Ethernet Interface is a critical component within a Modbus Gateway that enables network connectivity via Ethernet protocols. It serves as the physical and data link layer interface that allows the gateway to communicate with other devices over Ethernet networks, facilitating the transmission of Modbus TCP/IP messages between industrial control systems and supervisory systems. This interface is designed for integration into industrial automation environments, where reliable and deterministic communication is essential. It operates according to IEEE 802.3 standards, ensuring compatibility with standard Ethernet networks. The interface handles the conversion of electrical signals from the gateway's internal circuitry into Ethernet frames, managing physical layer signaling and media access control (MAC). It provides the necessary hardware for RJ45 connector connectivity, allowing straightforward integration into existing network infrastructures. When integrated into a Modbus Gateway, it enables the conversion between Modbus RTU/ASCII serial protocols and Modbus TCP/IP over Ethernet networks, bridging legacy serial devices with modern IP-based systems. The component is typically mounted on a printed circuit board (PCB) and includes an Ethernet PHY chip and magnetics module for signal conditioning and isolation. The data transfer rate is typically 10/100/1000 Mbps, but the actual supported speed depends on the specific model and application. For procurement and verification, it is essential to confirm the exact specifications, including supported speeds, connector types, and compliance with relevant standards, with the legal manufacturer or supplier. This directory entry serves as a reference, not a certification of compliance.
Working Principle
The Ethernet Interface converts electrical signals from the gateway's internal circuitry into Ethernet frames following IEEE 802.3 standards. It handles physical layer signaling, media access control (MAC), and provides the necessary hardware for RJ45 connector connectivity. When integrated into a Modbus Gateway, it enables the conversion between Modbus RTU/ASCII serial protocols and Modbus TCP/IP over Ethernet networks.
Common Materials
PCB (Printed Circuit Board), RJ45 connector, Ethernet PHY chip, Magnetics module
Technical Parameters

What to specify in your RFQ

  • Data transfer rate, typically 10/100/1000 Mbps for industrial Ethernet interfaces in Mbps

These are the quantities to specify to the manufacturer when sizing or requesting a quote. The manufacturer's own documentation governs the exact figures and applicable standard.

Components / BOM
  • RJ45 Connector Part
    Provides physical connection for Ethernet cables with 8P8C configuration
    Material: plastic with gold-plated contacts
  • Ethernet PHY Chip Part
    Physical layer transceiver that handles analog signal transmission and reception
    Material: semiconductor silicon
  • Magnetics Module
    Provides electrical isolation and signal conditioning through transformers
    Material: ferrite core with copper windings
  • LED Indicators Part
    Visual status indicators for link activity and network speed
    Material: LED chips with plastic housing
  • Media Access Control
    Handles frame addressing and access control at the data link layer.

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Ethernet Interface.

Ethernet Port LAN Interface Network Interface

Applied To / Applications

This component is essential for the following industrial systems and equipment:

Modbus Gateway
View system integration details

Industrial Ecosystem & Supply Chain Structure

Complementary Systems
Downstream Applications
Specialized Tooling

Application Fit & Sizing Matrix

Operational Limits
pressure: N/A (non-fluid component)
other spec: IP20 rating, 10/100/1000 Mbps data rate
temperature: -40°C to 85°C
Media Compatibility
✓ Control cabinets ✓ PLC enclosures ✓ Industrial networking panels
Unsuitable: Outdoor environments without proper IP-rated housing
Sizing Data Required
  • Network speed requirements (10/100/1000 Mbps)
  • Number of required ports
  • Mounting type (DIN rail, panel, etc.)

Reliability & Engineering Risk Analysis

Failure Mode & Root Cause
Physical connector degradation
Cause: Repeated mating cycles, mechanical stress, corrosion from environmental contaminants, or improper handling leading to bent pins, worn contacts, or broken latches.
Link instability or packet loss
Cause: Electrical interference (EMI/RFI), cable damage (kinks, crushing, or exceeding bend radius), poor termination, or incompatible/outdated network driver firmware causing signal integrity issues.
Maintenance Indicators
  • Intermittent or flickering link status LED on the network interface, indicating unstable physical connection.
  • Audible clicking or popping from the Ethernet port or connected cable during data transmission, suggesting electrical arcing or poor contact.
Engineering Tips
  • Implement proper cable management: Use strain relief, avoid tight bends exceeding the cable's minimum bend radius, and secure cables away from heat sources and moving equipment to prevent physical damage and EMI.
  • Regularly update and validate firmware/drivers: Schedule updates during maintenance windows, use manufacturer-recommended versions, and perform link integrity tests after updates to ensure compatibility and optimal performance.

Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.

Compliance & Manufacturing Standards

Applicable Standards
ISO/IEC 8802-3:2021 (Ethernet standard) ANSI/TIA-568.2-D (Structured cabling) CE marking (EU EMC Directive 2014/30/EU)

Quoted from the published standard.

Manufacturing Precision
  • Connector pin alignment: +/-0.1mm
  • PCB trace width: +/-10% of nominal
Quality Inspection
  • Bit Error Rate Test (BERT)
  • Electromagnetic Compatibility (EMC) testing

Manufacturers of Ethernet Interface

Manufacturer profiles associated with Ethernet Interface.

Sourcing Ethernet Interface from China?
Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.
Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Share this page

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review · Page last updated 6 September 2026

Technical documentation
Request current drawings, revision history, and a signed specification sheet.
Manufacturing capability
Verify equipment lists, process limits, capacity, and representative production evidence.
Inspection readiness
Confirm test methods, calibrated equipment, sampling plans, and traceable reports.
Supplier transparency
Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Supply Chain Compatible Machinery & Devices

Industrial IoT Gateway

The Industrial IoT Gateway is a ruggedized edge computing device designed for industrial environments.

Explore Specs →
Modular Industrial Edge Computing Device

This modular industrial edge computing device is a ruggedized system designed for deployment in harsh industrial environments to perform real-time data processing, analytics, and control functions at the network edge.

Explore Specs →
Industrial Smart Camera Module

The Industrial Smart Camera Module is a compact, self-contained vision processing unit designed for integration into industrial machinery and production lines.

Explore Specs →
Surface Mount Resistor

Passive electronic component for current limiting and voltage division in circuits

Explore Specs →

Frequently Asked Questions

What is the role of the Ethernet Interface in a Modbus Gateway?

It provides the physical and data link layer connectivity, enabling the gateway to communicate over Ethernet networks and convert Modbus RTU/ASCII to Modbus TCP/IP.

What standards does the Ethernet Interface follow?

It follows IEEE 802.3 standards for Ethernet communication, but specific compliance must be verified with the manufacturer for the exact model.

What data transfer rates are supported?

Typically 10/100/1000 Mbps, but the actual supported speed depends on the specific model and must be confirmed with the supplier.

What materials are used in the Ethernet Interface?

It includes a PCB, RJ45 connector, Ethernet PHY chip, and magnetics module. These are standard components, but exact specifications should be verified.

Data basis: editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records.

Preliminary Technical Classification
This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.
Buyer enquiry

Request manufacturing insight for Ethernet Interface

Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.

Where it goes
Straight to the CNFX editorial desk, and to the manufacturer if this product is linked to a claimed profile. Nothing is broadcast to a supplier list.
Your details stay here
We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman
CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What we don't claim
A listing is not an endorsement. Qualify every supplier and verify every figure yourself before ordering.

Your business information is used only to process this request.

Thank you! Your message has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at [email protected].

Need to Manufacture Ethernet Interface?

Compare manufacturer profiles with relevant product and process capability.

Create Manufacturer Profile Contact Us
Previous Product
XY Positioning Stage
Last Product
Get QuotesChat