Feedback Resistor Divider: Voltage Rating 50V to 200V

Component Specifications

Definition

A feedback resistor divider is a critical passive component in voltage regulator circuits, particularly buck converters, consisting of two or more precision resistors connected in series to create a voltage divider network. It samples a fraction of the output voltage and feeds it back to the control IC's feedback pin, enabling closed-loop regulation by comparing it with an internal reference voltage to adjust the switching duty cycle.

Working Principle

The resistor divider operates on Ohm's law and the voltage divider principle: V_fb = V_out × (R2/(R1+R2)), where V_fb is the feedback voltage sent to the controller. This allows the PWM controller to maintain stable output voltage by dynamically adjusting the switching MOSFET's on-time based on the error between V_fb and the reference voltage.

Materials

Thick-film or thin-film resistive material (ruthenium oxide, nickel-chromium) on ceramic substrate (alumina), with silver-palladium terminations, epoxy coating for protection.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Power Rating	0.1W to 0.25W per resistor
Voltage Rating	50V to 200V
Resistance Tolerance	±1% to ±0.1%
Operating Temperature	-55°C to +155°C
Temperature Coefficient	±100 ppm/°C to ±25 ppm/°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

IEC 60115, MIL-PRF-914

Parent Products

This component is used in the following industrial products

Voltage Regulator (Buck Converter)

A switching DC-DC power converter that steps down voltage while stepping up current from its input to output.

View Product Details

Engineering Analysis

Risks & Mitigation

Resistance drift over temperature
Solder joint failure
Moisture ingress causing corrosion
Overvoltage damage

FMEA Triads

Trigger: Resistance value shift due to thermal stress
Failure: Inaccurate feedback voltage causing output voltage deviation
Mitigation: Use resistors with low temperature coefficient (≤50 ppm/°C) and proper thermal management

Trigger: Poor solder joint or PCB trace damage
Failure: Open circuit in divider, leading to loss of feedback and uncontrolled output voltage
Mitigation: Implement robust PCB layout, use automated soldering, and perform electrical testing

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±1% resistance tolerance minimum for industrial applications

Test Method

Resistance measured with 4-wire Kelvin method; stability tested per IEC 60115-1 under load and temperature cycling

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Feedback Resistor Divider

Manufacturer profiles associated with Feedback Resistor Divider.

Sourcing Feedback Resistor Divider from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Marking Strip

A durable marking strip used for terminal identification in motor terminal blocks to ensure proper electrical connections and safety compliance.

Gland Body

A gland body is the main housing component of an aluminum cable gland that provides mechanical protection and environmental sealing for electrical cables entering enclosures.

Current Sense Resistor

A precision resistor used to measure current flow in electrical circuits by converting current to a measurable voltage drop.

Conductor Terminal

A conductor terminal is a critical electrical component designed to securely connect and terminate conductors in high-voltage insulating bushings, ensuring reliable electrical transmission and insulation integrity.

Frequently Asked Questions

Why is precision important in feedback resistor dividers?

Precision ensures accurate voltage sampling; even small resistance errors can cause significant output voltage deviations, affecting system stability and performance.

Can I use standard resistors instead of precision ones?

No, standard resistors with higher tolerances (e.g., ±5%) lead to poor regulation, voltage drift, and potential damage to sensitive loads; precision resistors (±1% or better) are essential.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Feedback Resistor Divider