Reinforcement Edge is a critical sealing component in leather hydraulic piston seals that prevents extrusion and enhances durability under high-pressure conditions.
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Thickness | 1.5-3.0 mm | |
| Compression Set | <15% after 24h at 100°C | |
| Pressure Rating | Up to 40 MPa | |
| Tensile Strength | ≥25 MPa | |
| Temperature Range | -40°C to +120°C |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
This component is used in the following industrial products
A practical evidence checklist for RFQ preparation and supplier evaluation.
CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.
Manufacturer profiles associated with Reinforcement Edge.
Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.
It prevents seal extrusion under high pressure by providing structural support to the leather material, maintaining seal integrity and extending service life.
Typically no—they are integrated during manufacturing, though some modular designs allow replacement, but this requires complete disassembly and professional installation.
Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.