Actuator Mounting Bracket: Load Capacity 500-2000N static

Component Specifications

Definition

A structural component designed to securely mount and align linear actuators within pressure plate assemblies, providing precise positioning, vibration damping, and load distribution for consistent operational performance in industrial applications.

Working Principle

Provides rigid mechanical interface between actuator and pressure plate assembly, transferring linear force while maintaining alignment through precision mounting holes and reinforced geometry to prevent deflection under operational loads.

Materials

High-strength aluminum alloy (e.g., 6061-T6) or stainless steel (e.g., 304/316) with corrosion-resistant finish; typical hardness: 80-95 HRB for aluminum, 150-200 HB for steel.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Weight	0.5-2.5kg depending on size
Load Capacity	500-2000N static
Surface Flatness	0.05mm/m
Mounting Hole Pattern	4x M8 threaded holes
Operating Temperature	-20°C to 120°C
Center Distance Tolerance	±0.1mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2768-m, DIN 931, ISO 9001

Parent Products

This component is used in the following industrial products

Pressure Plate Assembly

A mechanical assembly that applies controlled pressure during sole attachment operations

View Product Details

Inlet/Outlet Dampers or Vanes

Flow control devices installed at the inlet or outlet of an ID (Induced Draft) fan to regulate air/gas volume and pressure.

View Product Details

Engineering Analysis

Risks & Mitigation

Misalignment causing actuator binding
Material fatigue under cyclic loading
Corrosion in harsh environments
Vibration-induced loosening of fasteners

FMEA Triads

Trigger: Improper torque on mounting bolts
Failure: Bracket loosening during operation
Mitigation: Use thread-locking compounds and calibrated torque wrenches during installation

Trigger: Excessive side loading on actuator
Failure: Bracket deformation or cracking
Mitigation: Implement alignment verification procedures and use reinforced bracket designs

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Geometric tolerances per ISO 1101, dimensional tolerances per ISO 2768-m

Test Method

Static load testing per ASTM E8, vibration testing per ISO 10816, corrosion resistance per ASTM B117 salt spray test

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Actuator Mounting Bracket

Manufacturer profiles associated with Actuator Mounting Bracket.

Sourcing Actuator Mounting Bracket from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What are the key considerations when selecting an actuator mounting bracket?

Key factors include load capacity, material compatibility with operating environment, mounting hole alignment precision, vibration damping requirements, and compliance with industry standards for your specific application.

Can actuator mounting brackets be customized for specific machines?

Yes, most manufacturers offer custom brackets with modified hole patterns, materials, or dimensions to match specific machine requirements and actuator models.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Actuator Mounting Bracket