Bottom: Thickness 12-20 mm, Hardness 350-500 HB

Component Specifications

Definition

The bottom of a bucket is a critical structural component in earthmoving and material handling equipment, designed to withstand abrasive forces, impact loads, and continuous wear during digging, loading, and dumping cycles. It typically features reinforced construction, wear-resistant materials, and may include replaceable wear plates or liners to extend service life and maintain operational efficiency.

Working Principle

The bottom component functions as the primary contact surface with materials, distributing loads across the bucket structure while resisting abrasion and deformation. It works in conjunction with the cutting edge and sidewalls to form a cohesive unit that optimizes material retention, penetration, and discharge during excavation or loading tasks.

Materials

High-strength steel (e.g., Hardox 400, AR400, or equivalent abrasion-resistant steel), thickness typically 10-25mm depending on bucket size and application. May include welded-on wear plates or hardfacing overlays for enhanced durability.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Hardness	350-500 HB
Thickness	12-20 mm
Wear Life	2000-5000 operating hours under normal conditions
Weight Capacity	Varies by bucket size (e.g., 0.5-5 tons)

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 21873, ISO 10262, DIN 22261

Parent Products

This component is used in the following industrial products

Bucket

A container component of an elevator bucket conveyor designed to hold and transport bulk materials vertically or at an incline.

View Product Details

Engineering Analysis

Risks & Mitigation

Structural failure due to excessive wear
Reduced digging efficiency
Increased fuel consumption from added resistance
Material spillage during transport

FMEA Triads

Trigger: Abrasive material contact and impact loads
Failure: Progressive wear leading to thinning, holes, or cracks
Mitigation: Use abrasion-resistant materials, apply hardfacing, implement regular thickness inspections, and replace wear plates proactively

Trigger: Overloading beyond design capacity
Failure: Plastic deformation or cracking
Mitigation: Adhere to rated load limits, train operators on proper techniques, and reinforce high-stress areas

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±2 mm for flatness, ±1.5 mm for thickness in critical wear zones

Test Method

Ultrasonic thickness testing, visual inspection for cracks, hardness testing per ISO 6506

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Bottom

Manufacturer profiles associated with Bottom.

Sourcing Bottom from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What are the signs of bucket bottom wear that require attention?

Visible thinning, cracks, holes, or significant material loss exceeding 30% of original thickness indicate the need for repair or replacement to prevent structural failure.

How often should bucket bottom wear plates be replaced?

Replacement intervals depend on material abrasiveness and operating hours; typically every 1500-3000 hours in abrasive conditions, with regular inspections recommended every 250 hours.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Bottom