Display/Indicator (for gauges): Accuracy ±0.5% FS

Component Specifications

Definition

A display or indicator component specifically designed for force sensors and pressure gauges, providing visual representation of measured parameters such as force, pressure, or load. This component converts electrical signals from the sensor into human-readable formats through digital displays, analog dials, or LED indicators, enabling operators to monitor system performance and ensure operational safety.

Working Principle

The display/indicator receives analog or digital electrical signals from the force sensor or pressure transducer. These signals are processed through an internal microcontroller or analog circuit that converts them into visual outputs. Digital displays use LCD or LED technology to show numerical values, while analog indicators use mechanical movements driven by electromagnetic forces to position a needle on a calibrated scale.

Materials

Housing: ABS plastic or aluminum alloy; Display surface: Polycarbonate or tempered glass; Internal components: PCB with copper traces, silicon-based microcontrollers, LED/LCD elements; Mechanical parts: Stainless steel springs and pivots for analog indicators.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Accuracy	±0.5% FS
IP Rating	IP65
Resolution	0.1 N or 0.01 bar
Display Type	Digital LCD/LED or Analog Dial
Power Supply	24 VDC or 110-240 VAC
Measurement Range	0-1000 N or 0-100 bar
Operating Temperature	-10°C to 60°C
Communication Protocol	4-20 mA, 0-10 V, Modbus RTU

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 376, DIN EN 837, IEC 61010

Parent Products

This component is used in the following industrial products

Force Sensor / Pressure Gauge

A measurement device that monitors and displays clamping force or pressure within a mold box clamping system.

View Product Details

Engineering Analysis

Risks & Mitigation

Display malfunction due to electrical surges
Reading errors from electromagnetic interference
Physical damage from environmental exposure
Calibration drift over time

FMEA Triads

Trigger: Power supply voltage fluctuations
Failure: Display shows erratic readings or blanks out
Mitigation: Install voltage stabilizers and surge protectors in the power circuit

Trigger: Moisture ingress through housing seals
Failure: Corrosion of internal electronics leading to permanent failure
Mitigation: Use displays with appropriate IP ratings and conduct regular seal inspections

Trigger: Mechanical vibration in industrial environments
Failure: Analog needle becomes unstable or digital connections loosen
Mitigation: Implement vibration-damping mounts and secure all electrical connections

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5% of full scale for standard models, ±0.25% for precision models

Test Method

Comparison against NIST-traceable reference standards under controlled environmental conditions, following ISO/IEC 17025 procedures

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Display/Indicator (for gauges)

Manufacturer profiles associated with Display/Indicator (for gauges).

Sourcing Display/Indicator (for gauges) from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Mounting Interface

Precision mounting interface connecting punch tips to pharmaceutical tablet press machines for accurate tablet production.

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Frequently Asked Questions

What types of displays are available for force sensors?

Both digital (LCD/LED) and analog (dial with needle) displays are available. Digital displays offer precise numerical readouts with programmable features, while analog displays provide quick visual trends and are preferred in environments with electrical interference.

How do I calibrate a pressure gauge display?

Calibration involves comparing the display reading against a certified reference standard at multiple points across the measurement range. Adjustments are made through calibration screws or digital menus to ensure accuracy within specified tolerances.

Can display components be replaced independently of the sensor?

Yes, most displays are modular components that can be replaced separately from the sensor body, provided they match the electrical specifications and communication protocols of the original unit.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Display/Indicator (for gauges)