INDUSTRY COMPONENT

Enclosure/Housing

Protective housing for control panel components in industrial machinery.

View Specifications

Component Specifications

Definition
A structural enclosure designed to house and protect electrical and electronic components of a control panel, including PLCs, relays, circuit breakers, and terminal blocks, from environmental factors such as dust, moisture, chemicals, and physical impact, while ensuring electromagnetic compatibility and operator safety.
Working Principle
Provides physical protection, environmental sealing, electromagnetic shielding, and thermal management for sensitive control components, maintaining operational integrity and safety in industrial settings.
Materials
Typically constructed from cold-rolled steel (CRS), stainless steel (e.g., SS304, SS316), aluminum alloys (e.g., 6061-T6), or engineered plastics (e.g., polycarbonate, ABS) with IP (Ingress Protection) ratings (e.g., IP54, IP65) and NEMA classifications (e.g., NEMA 4X).
Technical Parameters
ParameterTypical rangeNotes & selection driver
ColorRAL 7035 (light grey) standard
MountingWall or floor mountable
Door TypeHinged with lock
IP RatingIP65
DimensionsStandard sizes (e.g., 600x600x200mm)
NEMA RatingNEMA 4X
Material Thickness1.5-3.0mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards
ISO 14120, IEC 60529, NEMA 250, DIN 40050

Parent Products

This component is used in the following industrial products

Control Panel

A centralized interface for monitoring and controlling industrial equipment and processes

View Product Details

Control Panel

A centralized interface for monitoring and controlling industrial equipment and processes

View Product Details

Control Panel

A centralized interface for monitoring and controlling industrial equipment and processes

View Product Details

Engineering Analysis

Risks & Mitigation
  • Inadequate sealing leading to component failure
  • Poor thermal management causing overheating
  • Non-compliance with safety standards
  • Corrosion in aggressive environments
FMEA Triads
Trigger: Improper sealing gasket installation
Failure: Moisture ingress damaging electrical components
Mitigation: Use certified IP-rated gaskets and regular inspection
Trigger: Insufficient ventilation or cooling
Failure: Overheating of PLCs or drives
Mitigation: Install fans, heat exchangers, or air conditioners based on heat load calculations

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance
±1mm on critical dimensions, flatness within 0.5mm/m
Test Method
IP testing per IEC 60529, vibration testing per IEC 60068-2-6, thermal cycling per IEC 60068-2-14

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation
Request current drawings, revision history, and a signed specification sheet.
Manufacturing capability
Verify equipment lists, process limits, capacity, and representative production evidence.
Inspection readiness
Confirm test methods, calibrated equipment, sampling plans, and traceable reports.
Supplier transparency
Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Enclosure/Housing

Manufacturer profiles associated with Enclosure/Housing.

Sourcing Enclosure/Housing from China?
Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.
Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Share this page

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Mounting Interface
Precision mounting interface connecting punch tips to pharmaceutical tablet press machines for accurate tablet production.
Chrome Plating
Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.
Upper Tool (Punch)
Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.
Main Frame
The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Frequently Asked Questions

What is the difference between IP65 and NEMA 4X ratings?

IP65 provides dust-tight and water-jet protection, while NEMA 4X adds corrosion resistance, commonly used in harsh industrial environments.

Can enclosures be customized for specific machinery?

Yes, custom sizes, cutouts, mounting options, and materials are available to fit unique control panel requirements.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification
This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Request Manufacturing Insight for Enclosure/Housing

Thank you. Your request has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at [email protected].
Yoke Bracket
Get QuotesChat