Can I contact factories directly on CNFX?

CNFX is an open directory. Each factory profile provides direct contact information.

Feed Inlet Flange/Connection Component – Machinery and Equipment Manufacturing

Component Specifications

Definition

A feed inlet flange/connection is a critical mechanical interface component designed to provide a secure, leak-proof, and precisely aligned connection between external material supply systems and the feed distribution system of industrial processing equipment. It serves as the primary entry point for raw materials, powders, granules, or liquids into the machine, ensuring controlled material flow while maintaining system integrity under operational pressures and environmental conditions. The component typically features standardized mounting patterns, sealing surfaces, and connection specifications to ensure compatibility with various supply systems.

Working Principle

The feed inlet flange/connection operates on the principle of creating a sealed mechanical interface between two systems. It uses precisely machined surfaces, gaskets, or sealing elements to prevent material leakage or contamination. Bolts or clamps apply uniform pressure to maintain the seal while allowing for controlled material passage. The design ensures proper alignment of incoming material flow with the feed distribution system's internal pathways, minimizing turbulence, pressure drops, and material degradation during transfer.

Materials

Typically manufactured from stainless steel (AISI 304, 316), carbon steel, aluminum alloys, or engineered plastics (PTFE, UHMW-PE) depending on application requirements. Materials are selected based on corrosion resistance, mechanical strength, temperature tolerance, and compatibility with processed materials. Sealing surfaces may include integrated gaskets made from silicone, Viton, EPDM, or PTFE.

Technical Parameters

Seal Type Flat Face, Raised Face, RTJ
Surface Finish Ra 0.8-3.2 μm
Connection Type Flanged, Clamp, Threaded, Quick-Connect
Number of Bolts 4-12
Pressure Rating 10-150 PSI (0.7-10.3 bar)
Flange Standards ANSI, DIN, JIS
Temperature Range -40°C to 200°C
Bolt Circle Diameter 50-300 mm

Standards

ISO 5211, DIN 2501, ANSI B16.5, ASME B16.47

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Feed Inlet Flange/Connection.

Parent Products

This component is used in the following industrial products

Feed Distribution System

A system within an industrial oil degumming centrifuge that evenly distributes the crude oil feed mixture into the centrifuge bowl for efficient separation.

View Product Details

Engineering Analysis

Risks & Mitigation

Material leakage
Misalignment causing flow restriction
Corrosion degradation
Gasket failure under thermal cycling
Bolting stress causing flange warpage

FMEA Triads

Trigger: Improper bolt torque during installation
Failure: Uneven gasket compression leading to leakage paths
Mitigation: Implement calibrated torque wrench procedures and sequential bolt tightening patterns

Trigger: Material incompatibility between flange and processed substance
Failure: Corrosion or chemical degradation compromising structural integrity
Mitigation: Conduct material compatibility testing and specify appropriate alloys/coatings

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance

±0.1 mm on critical dimensions, flatness within 0.05 mm across sealing surface

Test Method

Hydrostatic pressure testing per ASME BPVC Section VIII, helium leak detection for sanitary applications, surface roughness verification per ISO 4287

Buyer Feedback

★★★★☆ 4.8 / 5.0 (9 reviews)

"The Feed Inlet Flange/Connection we sourced perfectly fits our Machinery and Equipment Manufacturing production line requirements."

"Found 49+ suppliers for Feed Inlet Flange/Connection on CNFX, but this spec remains the most cost-effective."

"The technical documentation for this Feed Inlet Flange/Connection is very thorough, especially regarding technical reliability."

Related Components

Inspection Frame

Structural support component in automated fabric inspection systems that holds cameras, sensors, and lighting for defect detection.

Machine Frame

The rigid structural foundation of a CNC wood router that provides stability, vibration damping, and precision alignment for cutting operations.

pH Sensor Assembly

Precision pH sensor assembly for automated monitoring and dosing systems in industrial applications

Load Cell Assembly

Precision load cell assembly for automated powder dispensing systems

Frequently Asked Questions

What are the main differences between flanged and clamped feed inlet connections?

Flanged connections use bolted interfaces with gaskets for permanent, high-pressure applications, while clamped connections use quick-release mechanisms for frequent disassembly in sanitary or maintenance-intensive environments.

How do I select the appropriate material for a feed inlet flange?

Material selection depends on the processed material's corrosiveness, temperature requirements, sanitary standards, and mechanical loads. Stainless steel is common for food/pharma, while engineered plastics suit chemical applications.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Feed Inlet Flange/Connection