Housing/Pipe Section: Temperature Range -20°C to 200°C

Component Specifications

Definition

A housing or pipe section is the primary structural component of an in-line or static mixer that encloses the mixing elements (such as helical or plate elements) and provides a sealed conduit for fluid flow. It maintains pressure integrity, supports internal elements, and connects to upstream/downstream piping systems. Designed for laminar or turbulent flow regimes, it ensures proper fluid residence time and mixing efficiency without moving parts.

Working Principle

The housing/pipe section directs fluid through stationary mixing elements, creating flow division, radial mixing, and shear through geometric constraints. As fluid passes, the internal elements split and recombine streams, promoting homogenization via controlled turbulence or laminar shear, depending on design and Reynolds number.

Materials

Stainless steel (AISI 304/316), carbon steel, duplex steel, Hastelloy, PTFE-lined steel, or food-grade plastics (e.g., PVDF, PP), selected based on corrosion resistance, pressure rating, and fluid compatibility.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Length	200-2000 mm
Diameter	25-500 mm
Surface Finish	Ra ≤ 0.8 μm for sanitary applications
Pressure Rating	Up to 16 bar
Temperature Range	-20°C to 200°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2852, DIN 11850

Parent Products

This component is used in the following industrial products

In-line Mixer/Static Mixer

A stationary mixing device installed directly in a pipeline that blends beverage ingredients through geometric flow manipulation without moving parts.

View Product Details

Engineering Analysis

Risks & Mitigation

Corrosion from aggressive fluids
Pressure failure due to overrating
Contamination from improper material selection
Leakage at connection points

FMEA Triads

Trigger: Material degradation from chemical exposure
Failure: Leakage or structural breach
Mitigation: Use corrosion-resistant alloys and regular inspection

Trigger: Improper installation or alignment
Failure: Reduced mixing efficiency or seal failure
Mitigation: Follow manufacturer torque specs and alignment procedures

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Dimensional tolerances per ISO 2768-m, pressure testing per ASME B31.3

Test Method

Hydrostatic pressure test, visual inspection, surface roughness measurement

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Housing/Pipe Section

Manufacturer profiles associated with Housing/Pipe Section.

Sourcing Housing/Pipe Section from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the difference between a housing and a pipe section in static mixers?

A housing typically refers to a custom-designed enclosure for mixing elements, often with flanges or connections, while a pipe section is a standardized cylindrical segment integrated into piping systems; both serve similar structural and containment functions.

How do material choices affect housing performance?

Material selection impacts corrosion resistance, pressure capacity, temperature tolerance, and compliance with hygiene standards (e.g., food-grade stainless steel for sanitary applications).

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Housing/Pipe Section