Main Body/Casing: Material Thickness 1.5-3.0 mm

Component Specifications

Definition

The main body or casing is the principal structural component of a sealed enclosure machine, designed to house, protect, and support all internal mechanical, electrical, and electronic subsystems. It ensures environmental sealing (against dust, moisture, chemicals), provides structural integrity, facilitates thermal management, and often includes mounting points, access panels, and interface ports. In industrial contexts, it must withstand operational stresses, maintain seal integrity under specified conditions, and comply with safety and regulatory standards for the intended application environment.

Working Principle

Functions as a protective barrier and structural framework by enclosing internal components, maintaining a controlled internal environment through sealing mechanisms (gaskets, seals), dissipating heat via material properties or integrated cooling features, and providing mounting surfaces. It operates on principles of mechanical integrity, environmental isolation, and ergonomic access, often incorporating design elements for pressure equalization, EMI/RFI shielding, and safety interlocks.

Materials

Typically constructed from materials such as: stainless steel (e.g., SS304, SS316 for corrosion resistance), aluminum alloys (e.g., 6061-T6 for lightweight strength), engineered plastics (e.g., polycarbonate or ABS for impact resistance), or coated carbon steel. Material selection depends on factors like corrosion resistance, weight, thermal conductivity, cost, and compliance requirements (e.g., food-grade, chemical resistance).

Technical Parameters

Parameter	Typical range	Notes & selection driver
IP Rating	IP65 or higher
Seal Type	Silicone or EPDM gaskets
NEMA Rating	NEMA 4X
Mounting Type	Flanged or base-mounted
Surface Finish	Powder-coated or anodized
Pressure Rating	Withstands up to 0.1 bar overpressure
Material Thickness	1.5-3.0 mm
Operating Temperature	-20°C to 60°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 14120, ISO 13857, DIN 40050-9, IEC 60529

Parent Products

This component is used in the following industrial products

Sealed Enclosure

A hermetically sealed housing that provides controlled environmental isolation for sensitive calibration components.

View Product Details

Engineering Analysis

Risks & Mitigation

Seal failure leading to contamination
Structural fatigue under cyclic loading
Corrosion in harsh environments
Thermal overheating due to poor dissipation
Non-compliance with safety standards

FMEA Triads

Trigger: Improper gasket installation or material degradation
Failure: Loss of sealing integrity, allowing dust or moisture ingress
Mitigation: Use high-quality seals, regular maintenance checks, and follow installation guidelines per manufacturer specifications.

Trigger: Excessive operational pressure or impact
Failure: Casing deformation or crack formation
Mitigation: Design with safety margins, incorporate pressure relief features, and use impact-resistant materials.

Trigger: Exposure to corrosive chemicals without adequate protection
Failure: Material corrosion compromising structural integrity
Mitigation: Select corrosion-resistant materials, apply protective coatings, and implement environmental controls.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Dimensional tolerances per ISO 2768-m, flatness within 0.5 mm/m, seal groove depth ±0.1 mm

Test Method

Pressure decay test for sealing, salt spray test per ASTM B117 for corrosion, impact test per IEC 60068-2-75, and thermal cycling per IEC 60068-2-14.

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Main Body/Casing

Manufacturer profiles associated with Main Body/Casing.

Sourcing Main Body/Casing from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the difference between IP and NEMA ratings for a main body casing?

IP (Ingress Protection) ratings are international standards (IEC 60529) defining protection against solids and liquids, while NEMA ratings are North American standards for enclosures against environmental conditions like corrosion, ice, and oil. For example, IP65 indicates dust-tight and water-jet resistant, whereas NEMA 4X indicates watertight and corrosion-resistant.

How do I select the right material for a main body casing in corrosive environments?

Choose materials based on the specific corrosive agents: stainless steel (e.g., SS316) for general chemical resistance, aluminum with anodization for mild environments, or fiberglass-reinforced plastics for harsh chemical exposure. Always verify compatibility with industry standards and conduct material testing if needed.

What are common failure modes for main body casings in industrial applications?

Common failures include seal degradation leading to ingress, corrosion or material fatigue, structural deformation from overpressure or impact, and thermal stress cracks. Regular inspection, proper material selection, and adherence to design standards can mitigate these risks.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Main Body/Casing