Primary Coarse Filter: Temperature Range -20°C to 120°C

Component Specifications

Definition

A primary coarse filter is the first-stage filtration component in multi-stage filtration modules, designed to remove large particulate contaminants (typically >50-100 microns) from fluids or gases. It protects downstream fine filters from premature clogging and extends overall system lifespan by capturing debris, sediment, and coarse impurities before secondary filtration stages.

Working Principle

Mechanical filtration through porous media (mesh, screen, or depth filter elements) that physically traps particles larger than the pore size while allowing fluid/gas to pass. Operates via direct interception, inertial impaction, or sieving mechanisms depending on media configuration.

Materials

Stainless steel (AISI 304/316) mesh/screens, polypropylene depth filters, aluminum housings, nitrile rubber seals, reinforced polymer end caps

Technical Parameters

Parameter	Typical range	Notes & selection driver
Flow Rate	10-1000 L/min
Connection Type	NPT/BSP threaded
Filtration Rating	50-100 microns
Temperature Range	-20°C to 120°C
Element Surface Area	0.1-1.0 m²
Max Operating Pressure	10 bar

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2941, ISO 2942, DIN 24550

Parent Products

This component is used in the following industrial products

Multi-Stage Filtration Module

A specialized filtration component designed to remove impurities from molten metal through sequential filtration stages.

View Product Details

Engineering Analysis

Risks & Mitigation

Bypass leakage due to seal failure
Media collapse under high differential pressure
Bacterial growth in wet applications
Incompatible chemical resistance

FMEA Triads

Trigger: Seal degradation from chemical exposure
Failure: Fluid bypass contaminating downstream components
Mitigation: Use chemically compatible seals; implement regular inspection schedule

Trigger: Excessive particulate loading
Failure: Pressure drop exceeding system limits
Mitigation: Install pre-filters or increase filter surface area; establish preventive maintenance

Trigger: Improper installation orientation
Failure: Reduced filtration efficiency
Mitigation: Clear directional markings; include installation verification in procedures

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±5% on filtration rating, ±0.1 bar on pressure rating

Test Method

ISO 2941 (burst pressure), ISO 2942 (material integrity), multipass filtration efficiency testing per ISO 16889

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Primary Coarse Filter

Manufacturer profiles associated with Primary Coarse Filter.

Sourcing Primary Coarse Filter from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the main purpose of a primary coarse filter?

To remove large particles and debris from fluids/gases before they reach finer downstream filters, preventing premature clogging and protecting sensitive system components.

How often should primary coarse filters be replaced?

Replacement intervals depend on contaminant load, typically every 1-6 months. Monitor pressure differential across the filter - replace when ΔP exceeds manufacturer specifications.

Can coarse filters be cleaned and reused?

Some metal mesh filters are cleanable via backwashing or ultrasonic cleaning, while disposable depth filters must be replaced. Always follow manufacturer guidelines.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Primary Coarse Filter