Scraper Blade / Knife: Blade Length 100-3000 mm

Component Specifications

Definition

A precision-engineered cutting or scraping component designed for continuous material removal, surface cleaning, or product separation in industrial machinery. Typically part of a scraper assembly, it operates against moving surfaces like conveyor belts, rollers, or processing drums to eliminate residual materials, prevent buildup, and maintain operational efficiency.

Working Principle

Operates through direct mechanical contact with a moving surface, utilizing its sharp edge or angled profile to shear, scrape, or peel off materials. The blade applies controlled pressure to remove adhered substances without damaging the underlying surface, often assisted by tensioning systems for consistent performance.

Materials

High-carbon steel, stainless steel (e.g., 304, 316), tungsten carbide, polyurethane, or engineered polymers. Selection depends on abrasion resistance, corrosion resistance, and compatibility with processed materials.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Hardness	45-65 HRC
Thickness	1-10 mm
Edge Angle	30-90 degrees
Blade Length	100-3000 mm
Operating Temperature	-20°C to 200°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

DIN 8589

Parent Products

This component is used in the following industrial products

Scraper Assembly

A mechanical assembly designed to continuously remove filtered solids from the surface of a rotary drum vacuum filter.

View Product Details

Engineering Analysis

Risks & Mitigation

Blade wear leading to inefficient cleaning
Improper tension causing surface damage
Material incompatibility causing corrosion

FMEA Triads

Trigger: Abrasive materials
Failure: Premature edge wear
Mitigation: Use hardened or carbide-tipped blades

Trigger: Incorrect installation angle
Failure: Ineffective scraping or surface damage
Mitigation: Follow manufacturer's alignment specifications

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5 mm on critical dimensions

Test Method

Visual inspection, hardness testing, dimensional verification per manufacturer specifications

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Scraper Blade / Knife

Manufacturer profiles associated with Scraper Blade / Knife.

Sourcing Scraper Blade / Knife from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

How often should scraper blades be replaced?

Replacement frequency depends on material abrasiveness and operating hours. Typically every 3-12 months with regular inspection for wear.

Can scraper blades be sharpened?

Yes, many metal blades can be resharpened unless excessively worn. Polyurethane blades are usually replaced rather than sharpened.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Scraper Blade / Knife