Support Core: Temperature Range -20°C to 120°C

Component Specifications

Definition

The Support Core is a cylindrical or multi-lobed structural element within separation cartridges and filtration systems that serves as the central backbone. It maintains the geometric integrity of pleated or wound filtration media, prevents collapse under pressure differentials, and ensures uniform flow distribution across the filter surface. Typically manufactured with precision tolerances, it interfaces with end caps and housings to create sealed filtration assemblies.

Working Principle

The Support Core operates by providing radial and axial structural support to filtration media, resisting compressive forces from fluid pressure and mechanical loads. It maintains consistent spacing between media layers, prevents channeling or bypass, and allows filtered fluid to flow through its perforated or slotted structure toward the outlet. Its design ensures minimal pressure drop while maximizing filtration efficiency and media utilization.

Materials

Stainless steel (304, 316L), polypropylene, ABS plastic, or aluminum, selected based on chemical compatibility, temperature range, and pressure requirements.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Length	100-1000 mm
Diameter	25-300 mm
Wall Thickness	1-5 mm
Pressure Rating	Up to 10 bar
Perforation Size	1-10 mm
Temperature Range	-20°C to 120°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2942, DIN 24550

Parent Products

This component is used in the following industrial products

Separation Element/Cartridge

A replaceable filtration or separation component within an in-line separation unit that physically separates contaminants, particles, or specific substances from a fluid stream.

View Product Details

Engineering Analysis

Risks & Mitigation

Material incompatibility with process fluids
Structural failure under high pressure
Improper fit causing bypass leakage

FMEA Triads

Trigger: Corrosion due to chemical exposure
Failure: Loss of structural integrity and media collapse
Mitigation: Use corrosion-resistant materials like 316L stainless steel or compatible plastics

Trigger: Excessive pressure differential
Failure: Core deformation or rupture
Mitigation: Design with adequate wall thickness and pressure ratings; install pressure relief valves

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5 mm on diameter, ±1.0 mm on length

Test Method

Pressure hold test per ISO 2942, dimensional verification, material certification

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Support Core

Manufacturer profiles associated with Support Core.

Sourcing Support Core from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What is the primary function of a Support Core?

To provide structural integrity to filtration media, prevent collapse under pressure, and ensure uniform fluid flow.

Can Support Cores be customized for different applications?

Yes, they are often customized in diameter, length, material, and perforation pattern to match specific filtration requirements.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Support Core