Top / Lid: Temperature Range -20°C to 150°C, Thickness 10-40 mm

Component Specifications

Definition

The Top/Lid is a precision-engineered component that forms the upper closure of a separation bowl in centrifugal separation equipment. It ensures hermetic sealing during high-speed rotation, maintains internal pressure integrity, and often incorporates features for feed inlet, discharge outlets, or sensor integration. This component withstands significant centrifugal forces, pressure differentials, and corrosive media while maintaining dimensional stability.

Working Principle

The lid seals the separation bowl chamber during centrifugal operation, creating a closed system where centrifugal force separates materials by density. It maintains pressure containment, allows controlled material flow through integrated ports, and often includes balancing features to ensure rotational stability at high speeds (typically 3,000-15,000 RPM).

Materials

Stainless steel 316L (most common), duplex stainless steels (2205/2507), titanium alloys for corrosive applications, or aluminum alloys for lightweight requirements. Surface finishes: Ra ≤ 0.8 μm for sealing surfaces, with optional coatings like PTFE or ceramic for specific applications.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Diameter	150-800 mm
Flatness	≤ 0.1 mm/m
Seal Type	O-ring, gasket, or metal-to-metal
Thickness	10-40 mm
Surface Finish	Ra 0.4-0.8 μm
Pressure Rating	Up to 10 bar
Temperature Range	-20°C to 150°C
Concentricity Tolerance	≤ 0.05 mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 1940-1, ISO 286-2, DIN 11850, DIN 24960

Parent Products

This component is used in the following industrial products

Separation Bowl

The rotating component in an industrial oil degumming centrifuge where centrifugal force separates phospholipids and other impurities from crude vegetable oils.

View Product Details

Engineering Analysis

Risks & Mitigation

Seal failure leading to leakage
Fatigue cracking from cyclic loading
Corrosion in aggressive media
Imbalance causing vibration
Thermal stress deformation

FMEA Triads

Trigger: Seal degradation or improper installation
Failure: Leakage of process media
Mitigation: Regular seal inspection/replacement, proper torque procedures, seal compatibility verification

Trigger: Material fatigue from cyclic pressure/rotation
Failure: Crack formation and catastrophic failure
Mitigation: Regular NDT inspection, proper material selection, stress analysis during design

Trigger: Corrosion from aggressive process media
Failure: Material thinning and structural compromise
Mitigation: Corrosion-resistant materials, protective coatings, regular thickness monitoring

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Dimensional tolerances per ISO 286-2 medium class, concentricity ≤ 0.05 mm, flatness ≤ 0.1 mm/m

Test Method

Pressure testing per ASME BPVC, leak testing with helium mass spectrometry, dimensional verification with CMM, material certification per EN 10204 3.1

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Top / Lid

Manufacturer profiles associated with Top / Lid.

Sourcing Top / Lid from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What is the primary function of a separation bowl top lid?

The primary function is to provide hermetic sealing of the separation bowl during high-speed centrifugal operation, maintaining pressure integrity while allowing controlled material flow through integrated ports.

What materials are commonly used for separation bowl lids?

Stainless steel 316L is most common for general applications, with duplex stainless steels for corrosive environments, titanium for highly corrosive media, and aluminum alloys for weight-sensitive applications.

How does the lid contribute to separation efficiency?

By maintaining precise sealing and pressure conditions, the lid ensures optimal centrifugal force application and prevents contamination or pressure loss that would reduce separation efficiency.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Top / Lid