Property Measurement Chamber

Product Specifications

Technical details and manufacturing context for Property Measurement Chamber

Definition

A Property Measurement Chamber is a component used within 'Special Properties' systems to provide a controlled environment for precise measurement of physical, chemical, or mechanical properties. It isolates test specimens from external variables, ensuring accurate data collection for quality control, research, and development. The chamber is constructed with materials such as stainless steel, tempered glass, and insulation materials, and is available in a standard internal dimension of 1000 x 1000 x 1000 mm, with custom sizes on request. Key parameters include a temperature range of -40 to 85 °C (with special seals required below -40 °C), temperature uniformity of ±2 °C, humidity range of 20–98% RH, pressure range of 0.1–0.5 MPa, air exchange rate of 5–20 times per hour, electrical supply of 380 V AC ±10% (3-phase, 50/60 Hz), power consumption of 5–15 kW, ingress protection rating of IP54–IP65, interior material of SUS304 (optional SUS316L for corrosive media), weight of 500–1500 kg, and a footprint of 1500 x 1500 mm. These values are reference ranges and must be verified with the manufacturer for specific models. The chamber operates by creating a sealed environment where temperature, humidity, pressure, and other conditions are regulated. Sensors and instruments inside monitor the specimen's response and transmit data to external analysis systems. It is essential to confirm model-specific specifications and compliance with relevant standards such as IEC 60068-2-1, IEC 60068-2-2, IEC 60068-3-5, IEC 60068-2-78, ISO 14644-1, IEC 60038, IEC 60529, and ASTM A240. Always consult the legal manufacturer or supplier for detailed verification.

Working Principle

The chamber creates a sealed, controlled environment where temperature, humidity, pressure, or other conditions can be precisely regulated. Sensors and measurement instruments inside the chamber monitor the specimen's response to these conditions, transmitting data to external analysis systems. The chamber is designed to isolate the specimen from external variables, ensuring accurate and repeatable measurements. The user sets the desired conditions, and the chamber's control system adjusts heating, cooling, humidification, and pressure systems to maintain stability. Data collected from sensors is logged and can be used for quality control or research purposes. The chamber's performance is verified through calibration and adherence to relevant standards.

Common Materials

Stainless Steel, Tempered Glass, Insulation Materials

Technical Parameters

Parameter	Typical range	Notes & selection driver
Internal Dimensions (W x D x H)	1000 x 1000 x 1000 mm	Custom sizes available on request.
Temperature Range	-40–85 °C	Below -40°C may require special seals.IEC 60068-2-1, IEC 60068-2-2
Temperature Uniformity	±2 °C	Measured at steady state.IEC 60068-3-5
Humidity Range	20–98 % RH	Requires water supply for humidification.IEC 60068-2-78
Pressure Range	0.1–0.5 MPa	Below 0.1 MPa insufficient for some tests.
Air Exchange Rate	5–20 times/h	For cleanroom applications.ISO 14644-1
Electrical Supply	380 ±10% V AC, 3-phase, 50/60 Hz	Other voltages available.IEC 60038
Power Consumption	5–15 kW	Depends on operating conditions.
Ingress Protection	IP54–IP65	IP65 for dusty environments.IEC 60529
Interior Material	SUS304	Optional SUS316L for corrosive media.ASTM A240
Weight	500–1500 kg	Depends on size and options.
Footprint (W x D)	1500 x 1500 mm	Add clearance for maintenance.

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Components / BOM

Chamber Body
The chamber shell itself: encloses the process volume and carries the operating pressure and temperature.
Insulation Layer Part
Maintains stable internal temperature by minimizing heat transfer

Material: Polyurethane Foam
Observation Window
Allows visual monitoring of specimens during testing

Material: Tempered Glass
Sensor Mounting Points Part
Provides standardized locations for measurement sensors and probes

Material: Stainless Steel

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Property Measurement Chamber.

Applied To / Applications

This component is essential for the following industrial systems and equipment:

Special Properties

View system integration details

Manufacturers of Property Measurement Chamber

Manufacturer profiles associated with Property Measurement Chamber.

Sourcing Property Measurement Chamber from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Frequently Asked Questions

What is the standard internal dimension of the Property Measurement Chamber?

The standard internal dimension is 1000 x 1000 x 1000 mm (W x D x H), but custom sizes are available on request. Always confirm the exact dimensions with the supplier for your specific model.

What temperature range can the chamber achieve?

The temperature range is -40 to 85 °C. Note that operating below -40 °C may require special seals. The temperature uniformity is ±2 °C at steady state. Verify these values with the manufacturer for your application.

What standards are referenced for the chamber's performance?

The chamber references standards such as IEC 60068-2-1, IEC 60068-2-2, IEC 60068-3-5, IEC 60068-2-78, ISO 14644-1, IEC 60038, IEC 60529, and ASTM A240. These are procurement references and do not guarantee certification. Confirm compliance with the supplier.

What are the electrical supply requirements?

The electrical supply is 380 V AC ±10%, 3-phase, 50/60 Hz. Other voltages are available on request. Power consumption ranges from 5 to 15 kW depending on operating conditions. Always verify with the manufacturer.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Buyer enquiry

Request manufacturing insight for Property Measurement Chamber

Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.

Where it goes: Straight to the CNFX editorial desk, and to the manufacturer if this product is linked to a claimed profile. Nothing is broadcast to a supplier list.
Your details stay here: We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman: CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What we don't claim: A listing is not an endorsement. Qualify every supplier and verify every figure yourself before ordering.

pressure:	Vacuum to 10 bar
flow rate:	0-100 L/min
temperature:	-40°C to +200°C

Product Specifications

Industry Taxonomies & Aliases

Applied To / Applications

Industrial Ecosystem & Supply Chain Structure

Application Fit & Sizing Matrix

Reliability & Engineering Risk Analysis

Compliance & Manufacturing Standards