Industrial Presses
View system integration details
This page explains how Ram/Slide is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
The reciprocating component of an industrial press that applies force to the workpiece through the tooling.
Technical details and manufacturing context for Ram/Slide
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Rated Capacity | 100–2000 kN | Force applied to workpieceISO 16092 |
| Stroke Length | 50–500 mm | Maximum travel of slide |
| Slide Speed | 10–120 mm/s | Affects cycle time |
| Positioning Accuracy | ±0.05 mm | Repeatability of stop positionISO 230-2 |
| Guide Rail Type | Linear | Linear or box guide |
| Operating Temperature | -10–60 °C | Outside range seals may fail |
| Ingress Protection | IP54–IP65 | Protection against dust and waterIEC 60529 |
| Material Grade | HT250 | Cast iron for strengthGB/T 9439 |
| Weight | 200–5000 kg | Influences installation and handling |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
| pressure: | Up to 500 bar |
| other spec: | Max velocity: 0.5 m/s, Stroke length: 50-1000 mm |
| temperature: | -20°C to 150°C |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
Manufacturer profiles associated with Ram/Slide.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
The ram/slide is the primary moving component that travels along precision guides and transmits force from the drive mechanism to the tooling, enabling operations like stamping, forging, bending, and forming.
Key parameters include rated capacity (100–2000 kN), stroke length (50–500 mm), slide speed (10–120 mm/s), positioning accuracy (±0.05 mm), guide rail type, operating pressure (1.0–1.6 MPa), operating temperature (-10–60 °C), ingress protection (IP54–IP65), material grade, and weight. Always confirm with the manufacturer.
Referenced standards include ISO 16092 for rated capacity, ISO 230-2 for positioning accuracy, IEC 60529 for ingress protection, and GB/T 9439 for material grade. These are procurement references; actual compliance must be verified.
Materials on file include forged steel, cast iron, and alloy steel. The specific material grade, such as HT250 cast iron, should be confirmed with the supplier.
This component is essential for the following industrial systems and equipment:
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Compare manufacturer profiles with relevant product and process capability.