Analog Filter: Voltage Rating 15 VDC max, Impedance 50 ohms

Component Specifications

Definition

An analog filter is an electronic component designed to selectively pass or reject specific frequency ranges from an analog signal. In feedback input circuits, it conditions sensor signals by removing noise, harmonics, and unwanted frequencies before processing by control systems, ensuring accurate feedback for machine operation.

Working Principle

Operates using passive components (resistors, capacitors, inductors) or active components (op-amps) to create frequency-dependent impedance networks. These networks attenuate or amplify signal frequencies based on filter design (low-pass, high-pass, band-pass, or band-stop), modifying the signal's frequency response to meet system requirements.

Materials

PCB substrate (FR-4), copper traces, surface-mount or through-hole components (resistors: carbon film/metal film, capacitors: ceramic/electrolytic/film, inductors: ferrite core/air core), solder (tin-lead/lead-free), protective coating (conformal coating)

Technical Parameters

Parameter	Typical range	Notes & selection driver
Impedance	50 ohms
Filter Type	Low-pass
Voltage Rating	15 VDC max
Passband Ripple	0.5 dB max
Cutoff Frequency	1 kHz
Stopband Attenuation	40 dB min at 10 kHz
Operating Temperature	-40°C to +85°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 9001, IEC 60384, IPC-A-610

Parent Products

This component is used in the following industrial products

Feedback Input Circuit

Electronic circuit that receives and processes feedback signals from sensors in an axis control system

View Product Details

Engineering Analysis

Risks & Mitigation

Component aging affecting frequency response
Thermal drift altering filter characteristics
Electromagnetic interference (EMI) from nearby equipment
Soldering defects causing intermittent connections

FMEA Triads

Trigger: Capacitor dielectric degradation over time
Failure: Shift in cutoff frequency, reducing signal accuracy
Mitigation: Use high-reliability capacitors with stable dielectrics (e.g., C0G/NP0 ceramic), implement regular calibration checks

Trigger: Poor PCB layout creating parasitic capacitance/inductance
Failure: Unintended filter behavior or signal distortion
Mitigation: Follow EMI/EMC design guidelines, use ground planes, minimize trace lengths

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±5% for passive components, ±1% for critical parameters like cutoff frequency

Test Method

Frequency response analysis using network analyzer, impedance testing with LCR meter, environmental stress testing per IEC 60068

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Analog Filter

Manufacturer profiles associated with Analog Filter.

Sourcing Analog Filter from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Marking Ink

Specialized ink for permanent identification on surface mount resistors during manufacturing.

Dielectric Layer

Insulating layer in surface mount capacitors that stores electrical energy through polarization.

Optical Window

Transparent optical component for light transmission in polycarbonate lens housings

PCB Substrate

PCB substrate is the foundational insulating layer that provides mechanical support and electrical connectivity for electronic components in high-speed memory modules.

Frequently Asked Questions

What is the primary function of an analog filter in a feedback input circuit?

To condition analog signals from sensors by removing electrical noise and unwanted frequencies, ensuring clean, accurate input for control systems to maintain stable machine operation.

How does an analog filter differ from a digital filter?

Analog filters process continuous signals directly using physical components, offering real-time response with no sampling delay, while digital filters process digitized signals using algorithms, allowing more complex designs but introducing latency.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Analog Filter