Clamping Jaw/Bracket: Temperature Range -40°C to +85°C

Component Specifications

Definition

A mechanical clamping jaw/bracket designed specifically for antenna clamping mechanisms, providing rigid and adjustable fixation of antenna elements to mounting structures while maintaining precise alignment and minimizing signal interference through controlled clamping force distribution.

Working Principle

Utilizes mechanical leverage and friction-based clamping to secure antenna components against mounting surfaces, with adjustable tension mechanisms allowing for precise force application while maintaining structural integrity and alignment stability under varying environmental conditions.

Materials

Aluminum alloy 6061-T6 (primary), Stainless steel 304 (fasteners), Anodized surface finish (5-10μm thickness), Corrosion-resistant coating per MIL-A-8625 Type III

Technical Parameters

Parameter	Typical range	Notes & selection driver
Weight	0.8-1.2 kg
IP Rating	IP65
Dimensions	150×80×40 mm
Maximum Torque	25 N·m
Surface Roughness	Ra ≤ 1.6 μm
Temperature Range	-40°C to +85°C
Clamping Force Range	50-200 N
Vibration Resistance	5-2000 Hz, 5g

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2768-m, DIN 71802, IEC 60529

Parent Products

This component is used in the following industrial products

Antenna Clamping Mechanism

A mechanical component designed to securely fasten and position an antenna within an internal mounting system.

View Product Details

Engineering Analysis

Risks & Mitigation

Over-torquing leading to material fatigue
Galvanic corrosion in mixed-material environments
Vibration-induced loosening
Thermal expansion mismatch

FMEA Triads

Trigger: Incorrect torque application during installation
Failure: Reduced clamping force leading to antenna misalignment
Mitigation: Implement calibrated torque tools and installation procedures with verification steps

Trigger: Environmental corrosion in coastal areas
Failure: Degraded structural integrity and increased electrical resistance
Mitigation: Apply additional protective coatings and specify marine-grade materials for high-corrosion environments

Trigger: Thermal cycling stress
Failure: Material fatigue and crack propagation
Mitigation: Design with thermal expansion compensation features and conduct accelerated life testing

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.1 mm dimensional, ±0.5° angular alignment

Test Method

Vibration testing per MIL-STD-810G, Salt spray testing per ASTM B117, Torque retention testing per ISO 16047

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Clamping Jaw/Bracket

Manufacturer profiles associated with Clamping Jaw/Bracket.

Sourcing Clamping Jaw/Bracket from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Marking Ink

Specialized ink for permanent identification on surface mount resistors during manufacturing.

Dielectric Layer

Insulating layer in surface mount capacitors that stores electrical energy through polarization.

Optical Window

Transparent optical component for light transmission in polycarbonate lens housings

PCB Substrate

PCB substrate is the foundational insulating layer that provides mechanical support and electrical connectivity for electronic components in high-speed memory modules.

Frequently Asked Questions

What is the primary function of the clamping jaw/bracket in antenna systems?

It provides secure mechanical fixation of antenna elements while maintaining precise alignment and minimizing signal degradation through controlled clamping force distribution.

How does the material selection impact performance?

Aluminum alloy 6061-T6 offers optimal strength-to-weight ratio and corrosion resistance, while anodized coating provides electrical insulation and environmental protection.

What maintenance is required for long-term reliability?

Annual inspection of clamping force, visual check for corrosion, and torque verification of fasteners according to manufacturer specifications.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Clamping Jaw/Bracket