INDUSTRY COMPONENT

Connectors

Electrical connectors for signal and power transmission in interface circuit boards

View Specifications

Component Specifications

Definition
Connectors are electromechanical components designed to create temporary electrical connections between interface circuit boards and other electronic systems. They facilitate reliable signal transmission, power delivery, and data communication while allowing for modular assembly, maintenance, and replacement in industrial equipment.
Working Principle
Connectors establish electrical continuity through mating contacts (pins and sockets) that maintain physical and electrical connection via spring tension, friction, or locking mechanisms. They provide pathways for current flow and signal transmission while ensuring proper alignment, insulation, and environmental protection.
Materials
Contacts: Phosphor bronze, beryllium copper, or brass with gold/nickel/tin plating. Housing: Thermoplastics (PBT, PPS, LCP), thermosets (epoxy), or metal alloys. Insulators: High-temperature plastics with UL94-V0 flame rating.
Technical Parameters
  • IP Rating IP20-IP67
  • Mating Cycles ≥500 cycles
  • Current Rating 1A-50A
  • Voltage Rating 50V-600V AC/DC
  • Contact Resistance ≤20mΩ
  • Insulation Resistance ≥1000MΩ
  • Operating Temperature -40°C to +125°C
Standards
ISO 9001, IEC 60512, MIL-DTL-38999, DIN 41612

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Connectors.

electrical connectors PCB connectors industrial connectors signal connectors power connectors DIN connectors circular connectors board-to-board connectors Connectors Connectors in Computer, Electronic and Optical Product Manufacturing

Parent Products

This component is used in the following industrial products

Interface Circuit Board

A printed circuit board designed specifically for signal conversion, protocol translation, and electrical isolation between different subsystems or devices within a control interface.

View Product Details

Shielded Cable Harness

A shielded cable assembly designed to transmit electrical signals while protecting against electromagnetic interference (EMI) and radio frequency interference (RFI).

View Product Details

Feed Network

A network that distributes radio frequency signals to individual radiating elements in an antenna array.

View Product Details

Engineering Analysis

Risks & Mitigation
  • Intermittent connections due to vibration
  • Contact corrosion from moisture/chemicals
  • Misalignment during mating
  • Overheating from high current
  • Electromagnetic interference (EMI)
FMEA Triads
Trigger: Vibration or mechanical shock
Failure: Intermittent signal loss or open circuit
Mitigation: Use locking connectors, strain relief, and vibration-resistant designs
Trigger: Environmental contamination
Failure: Increased contact resistance or short circuits
Mitigation: Select sealed connectors (IP67+) and protective coatings

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance
Contact position tolerance ±0.1mm, insertion force 5-50N depending on pin count
Test Method
IEC 60512 for electrical, mechanical, and environmental testing; MIL-STD-202 for vibration/shock

Buyer Feedback

★★★★☆ 4.8 / 5.0 (17 reviews)

"Found 39+ suppliers for Connectors on CNFX, but this spec remains the most cost-effective."

"The technical documentation for this Connectors is very thorough, especially regarding technical reliability."

"Reliable performance in harsh Computer, Electronic and Optical Product Manufacturing environments. No issues with the Connectors so far."

Related Components

Storage Module
Industrial-grade storage module for data logging and firmware in IoT gateways
Ethernet Controller
Industrial Ethernet controller for real-time data transmission in Industrial IoT Gateways.
Serial Interface
Serial interface for industrial data transmission between IoT gateways and legacy equipment using RS-232/422/485 protocols.
I/O Connectors
Industrial I/O connectors are ruggedized interfaces that enable reliable data and power transmission between sensors, actuators, and Industrial IoT Gateways in harsh environments.

Frequently Asked Questions

What are the main types of connectors used in interface circuit boards?

Common types include board-to-board connectors, wire-to-board connectors, circular connectors, rectangular connectors (DIN style), and modular connectors (RJ45, USB).

How to ensure connector reliability in harsh industrial environments?

Use connectors with appropriate IP ratings, corrosion-resistant plating, high-temperature materials, and secure locking mechanisms. Regular inspection and proper mating alignment are essential.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Get Quote for Connectors

Connector Termination Connectors (e.g., FFC, Board-to-Board)