INDUSTRY COMPONENT

Receiver Stage

Receiver stage is the signal reception and conditioning component in driver/receiver ICs for industrial communication systems.

View Specifications

Component Specifications

Definition
The receiver stage is a critical electronic component within driver/receiver integrated circuits (ICs) that processes incoming electrical signals from transmission lines. It performs functions including signal amplification, noise filtering, impedance matching, and signal conditioning to convert received signals into clean, usable digital or analog outputs for downstream processing units in industrial control systems.
Working Principle
Operates by receiving differential or single-ended electrical signals through input pins, amplifying weak signals while rejecting common-mode noise, applying filtering to remove interference, and converting signals to appropriate logic levels through comparators or analog-to-digital converters for reliable data interpretation in industrial environments.
Materials
Semiconductor silicon substrate with copper/aluminum metallization, epoxy molding compound encapsulation, gold bonding wires, leadframe (Alloy 42 or copper), solder (SnAgCu) for surface mount assembly.
Technical Parameters
  • Data Rate Up to 100 Mbps
  • Package Type SOIC-8, TSSOP-14
  • ESD Protection ±15kV HBM
  • Supply Voltage 3.3V or 5V
  • Input Impedance 120Ω differential
  • Propagation Delay < 20 ns
  • Operating Temperature -40°C to +85°C
Standards
ISO 11898, IEC 61131, DIN EN 61131

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Receiver Stage.

receiver stage driver receiver IC industrial communication signal conditioning RS-485 receiver CAN bus receiver industrial electronics Receiver Stage in Computer, Electronic and Optical Product Manufacturing

Parent Products

This component is used in the following industrial products

Driver/Receiver IC

An integrated circuit that amplifies and conditions signals for transmission and reception in electronic systems.

View Product Details

Engineering Analysis

Risks & Mitigation
  • Signal degradation from impedance mismatch
  • ESD damage during handling
  • Thermal overstress in high-temperature environments
  • Electromagnetic interference from nearby equipment
FMEA Triads
Trigger: Poor solder joint due to thermal cycling
Failure: Intermittent signal loss or complete communication failure
Mitigation: Implement proper thermal management, use high-reliability solder materials, and conduct regular thermal testing
Trigger: Voltage transients from industrial equipment
Failure: Component damage leading to permanent communication failure
Mitigation: Incorporate transient voltage suppression circuits, follow proper grounding practices, and use surge-protected power supplies

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance
±1% for timing parameters, ±5% for voltage thresholds
Test Method
Automated test equipment (ATE) with industrial temperature cycling, signal integrity testing per ISO 11898, and HBM ESD testing per JEDEC standards

Buyer Feedback

★★★★☆ 4.8 / 5.0 (35 reviews)

"Great transparency on the Receiver Stage components. Essential for our Computer, Electronic and Optical Product Manufacturing supply chain."

"The Receiver Stage we sourced perfectly fits our Computer, Electronic and Optical Product Manufacturing production line requirements."

"Found 49+ suppliers for Receiver Stage on CNFX, but this spec remains the most cost-effective."

Related Components

Memory Module
Memory module for Industrial IoT Gateway data storage and processing
Storage Module
Industrial-grade storage module for data logging and firmware in IoT gateways
Ethernet Controller
Industrial Ethernet controller for real-time data transmission in Industrial IoT Gateways.
Serial Interface
Serial interface for industrial data transmission between IoT gateways and legacy equipment using RS-232/422/485 protocols.

Frequently Asked Questions

What is the primary function of a receiver stage in industrial applications?

The receiver stage converts noisy incoming signals from industrial communication buses into clean, reliable digital signals that can be processed by controllers and processors in automation systems.

How does the receiver stage handle electrical noise in industrial environments?

It employs differential signaling, common-mode rejection, built-in filtering, and robust ESD protection to maintain signal integrity despite electromagnetic interference common in factories.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Get Quote for Receiver Stage

Receiver Lens Reference Circuitry