Serial Communication Peripheral (e.g., CAN Controller): Component Specs, Materials & Applications

Component Specifications

Definition

A specialized hardware module integrated into microcontrollers that implements the Controller Area Network (CAN) protocol, providing robust serial communication for real-time distributed control in industrial environments. It handles message framing, arbitration, error detection, and data transmission at speeds up to 1 Mbps.

Working Principle

Operates on differential signaling using CAN_H and CAN_L lines with dominant/recessive bits for collision resolution through non-destructive bitwise arbitration. Messages are transmitted as frames with identifier, control, data, and CRC fields, using CSMA/CR (Carrier Sense Multiple Access with Collision Resolution) for bus access.

Materials

Silicon semiconductor (CMOS/BiCMOS), copper bonding wires, ceramic/plastic packaging with gold-plated pins. Dielectric materials include SiO2 for insulation and polyimide for passivation.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Bus Pins	CAN_H, CAN_L
Data Rate	10 kbps to 1 Mbps
Voltage Range	3.3V or 5V
Error Detection	CRC-15, bit stuffing
Message Buffers	8-32
ISO 11898 Compliance	Yes
Operating Temperature	-40°C to +125°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 11898, SAE J1939, ISO 15765, DIN 72551

Parent Products

This component is used in the following industrial products

Microcontroller/MCU

A compact integrated circuit designed to govern specific operations within the Cell Monitoring Unit (CMU), executing programmed instructions to monitor and manage battery cell parameters.

View Product Details

Engineering Analysis

Risks & Mitigation

Electromagnetic interference disrupting signals
Improper termination causing signal reflections
Voltage spikes damaging transceivers
Software bugs in message handling

FMEA Triads

Trigger: Poor PCB layout or shielding
Failure: Communication errors or bus lock-up
Mitigation: Follow ISO 11898 layout guidelines, use twisted-pair cables with proper grounding

Trigger: Missing termination resistors
Failure: Signal integrity degradation
Mitigation: Install 120Ω resistors at both bus ends

Trigger: Overvoltage on bus lines
Failure: Transceiver damage
Mitigation: Implement TVS diodes and current limiting

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±1.5% bit timing accuracy, ±2V common-mode voltage range

Test Method

Oscilloscope analysis for eye diagrams, protocol analyzers for frame validation, EMC testing per ISO 11452

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Serial Communication Peripheral (e.g., CAN Controller)

Manufacturer profiles associated with Serial Communication Peripheral (e.g., CAN Controller).

Sourcing Serial Communication Peripheral (e.g., CAN Controller) from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Marking Ink

Specialized ink for permanent identification on surface mount resistors during manufacturing.

Dielectric Layer

Insulating layer in surface mount capacitors that stores electrical energy through polarization.

Optical Window

Transparent optical component for light transmission in polycarbonate lens housings

PCB Substrate

PCB substrate is the foundational insulating layer that provides mechanical support and electrical connectivity for electronic components in high-speed memory modules.

Frequently Asked Questions

What is the maximum cable length for CAN communication?

Up to 40 meters at 1 Mbps, extending to 1000 meters at lower speeds like 50 kbps, depending on cable quality and termination.

How does CAN handle message collisions?

Through non-destructive arbitration: lower identifier values win bus access without data loss, ensuring deterministic priority-based communication.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Serial Communication Peripheral (e.g., CAN Controller)