Comparator IC: Supply Voltage 3V to 36V

Component Specifications

Definition

A Comparator IC is a specialized operational amplifier designed to compare two analog voltage signals and produce a binary output (high or low) based on which input voltage is greater. It typically features high gain, fast response times, and minimal offset voltage, making it essential for precision voltage monitoring, threshold detection, and analog-to-digital conversion in industrial circuits.

Working Principle

The comparator operates by amplifying the voltage difference between its inverting and non-inverting inputs. When the non-inverting input voltage exceeds the inverting input, the output switches to a high state (near the positive supply voltage). Conversely, when the inverting input is higher, the output switches low (near ground or negative supply). This binary output is used to trigger actions like alarms, shutdowns, or logic signals in monitoring systems.

Materials

Silicon semiconductor with doped regions, aluminum or copper interconnects, epoxy or ceramic packaging, gold bonding wires.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Output Type	Open-collector or push-pull
Response Time	40ns typical
Supply Voltage	3V to 36V
Input Offset Voltage	±1mV max
Operating Temperature	-40°C to 125°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 9001, IEC 60747

Parent Products

This component is used in the following industrial products

Voltage Monitoring Circuit

Electronic circuit that continuously measures and reports voltage levels within a redundant power supply system.

View Product Details

Engineering Analysis

Risks & Mitigation

Thermal runaway under high load
Input voltage exceeding absolute maximum ratings
Electrostatic discharge (ESD) damage during handling

FMEA Triads

Trigger: Excessive input voltage differential
Failure: Output latch-up or permanent damage
Mitigation: Implement input clamping diodes and adhere to voltage specifications

Trigger: High-frequency noise on inputs
Failure: False triggering or output oscillations
Mitigation: Use low-pass filters and proper PCB layout with ground planes

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5% for critical voltage thresholds

Test Method

Automated test equipment (ATE) with precision voltage sources and oscilloscopes for response time verification

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Comparator IC

Manufacturer profiles associated with Comparator IC.

Sourcing Comparator IC from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Contact Plate

A conductive plate in motor terminal blocks that establishes electrical contact between conductors.

Marking Strip

A durable marking strip used for terminal identification in motor terminal blocks to ensure proper electrical connections and safety compliance.

Gland Body

A gland body is the main housing component of an aluminum cable gland that provides mechanical protection and environmental sealing for electrical cables entering enclosures.

Current Sense Resistor

A precision resistor used to measure current flow in electrical circuits by converting current to a measurable voltage drop.

Frequently Asked Questions

What is the difference between a comparator and an op-amp?

A comparator is optimized for fast switching between two output states based on input comparison, often with open-collector outputs, while an op-amp is designed for linear amplification with feedback and operates in closed-loop configurations.

How do I choose a comparator IC for industrial applications?

Consider supply voltage range, response time, input offset voltage, operating temperature, and output type (e.g., open-collector for flexibility) based on your circuit requirements and environmental conditions.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Comparator IC