Mounting Brackets/Supports: Load Capacity 50-500 kg

Component Specifications

Definition

Structural components designed to securely mount, align, and support vertical riser busbars within electrical enclosures or frames. These brackets ensure proper spacing, mechanical stability, and electrical isolation while accommodating thermal expansion and vibration in industrial applications.

Working Principle

Mounting brackets provide fixed attachment points that distribute mechanical loads from busbars to supporting structures, maintaining precise alignment and preventing movement that could cause electrical faults or mechanical stress. Supports isolate busbars electrically while allowing for thermal expansion through slotted holes or flexible designs.

Materials

Galvanized steel (ASTM A653), aluminum alloy (6061-T6), or stainless steel (304/316) with insulating materials like glass-reinforced polyester or ceramic for isolation.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Load Capacity	50-500 kg
Temperature Range	-40°C to 120°C
Insulation Voltage	Up to 1000V
Corrosion Resistance	IP54 minimum
Mounting Hole Pattern	Standardized (e.g., M8, M10)

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 12944, DIN 43671, IEC 61439

Parent Products

This component is used in the following industrial products

Vertical Riser Busbar

A vertical electrical conductor system within a Motor Control Center that distributes power between horizontal busbars at different levels.

View Product Details

Header Manifold

A distribution component in cooling water systems that collects and redirects fluid flow through multiple branches.

View Product Details

Engineering Analysis

Risks & Mitigation

Incorrect installation causing busbar misalignment
Insufficient load capacity leading to mechanical failure
Corrosion in harsh environments compromising structural integrity
Inadequate electrical isolation causing short circuits

FMEA Triads

Trigger: Improper torque application during installation
Failure: Bracket loosening over time due to vibration
Mitigation: Use calibrated torque tools and follow manufacturer specifications; implement regular inspection schedules

Trigger: Material incompatibility in corrosive environments
Failure: Bracket corrosion leading to structural weakening
Mitigation: Select appropriate materials (e.g., stainless steel 316 for high-corrosion areas); apply protective coatings per ISO 12944

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5mm for mounting hole positions, ±1° for angular alignment

Test Method

Static load testing per IEC 61439-1, dielectric strength testing, salt spray testing per ISO 9227

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Mounting Brackets/Supports

Manufacturer profiles associated with Mounting Brackets/Supports.

Sourcing Mounting Brackets/Supports from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Contact Plate

A conductive plate in motor terminal blocks that establishes electrical contact between conductors.

Marking Strip

A durable marking strip used for terminal identification in motor terminal blocks to ensure proper electrical connections and safety compliance.

Gland Body

A gland body is the main housing component of an aluminum cable gland that provides mechanical protection and environmental sealing for electrical cables entering enclosures.

Current Sense Resistor

A precision resistor used to measure current flow in electrical circuits by converting current to a measurable voltage drop.

Frequently Asked Questions

What are the key considerations when selecting mounting brackets for vertical riser busbars?

Key considerations include load capacity, material compatibility with busbars, insulation requirements, corrosion resistance for the environment, compliance with standards like IEC 61439, and thermal expansion accommodation.

Can mounting brackets be used interchangeably between different busbar systems?

Generally no - brackets are designed for specific busbar profiles and mounting configurations. Interchangeability requires matching hole patterns, dimensions, and electrical isolation specifications.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Mounting Brackets/Supports