Can I contact factories directly on CNFX?

CNFX is an open directory. Each factory profile provides direct contact information.

Mounting Flanges/Brackets Component – Food Manufacturing

Component Specifications

Definition

Mounting flanges and brackets are structural components designed to provide secure attachment points for stainless steel washing tanks in industrial food processing environments. These components ensure proper alignment, stability, and load distribution during tank installation and operation, typically featuring corrosion-resistant finishes and precise machining for compatibility with standard tank designs.

Working Principle

Mounting flanges provide flat, bolted connection surfaces that distribute mechanical loads evenly across the tank structure, while brackets offer cantilevered or supported attachment points that transfer operational forces (including fluid weight, vibration, and thermal expansion) to the building framework or supporting structure through mechanical fasteners.

Materials

Austenitic stainless steel (AISI 304 or 316L), with optional electropolished or passivated surfaces for enhanced corrosion resistance in wet environments. Material thickness typically ranges from 3-10mm depending on load requirements.

Technical Parameters

Surface Finish Ra ≤ 0.8μm
Flange Thickness 5-8mm
Bolt Hole Pattern Standardized (e.g., 4-hole square or circular)
Temperature Range -20°C to 150°C
Corrosion Resistance Pass ASTM A967 nitric acid test
Bracket Load Capacity 200-500kg

Standards

ISO 14159, DIN 11850, 3-A Sanitary Standards

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Mounting Flanges/Brackets.

Parent Products

This component is used in the following industrial products

Stainless Steel Washing Tank

The primary containment vessel in an industrial ultrasonic vegetable washer where produce is submerged and cleaned using ultrasonic cavitation.

View Product Details

Engineering Analysis

Risks & Mitigation

Improper load distribution causing structural failure
Corrosion in high-moisture environments
Microbial harborage in surface imperfections
Vibration-induced fastener loosening

FMEA Triads

Trigger: Inadequate corrosion protection
Failure: Structural weakening and potential contamination
Mitigation: Use 316L stainless steel with passivation; implement regular inspection protocols

Trigger: Incorrect installation torque
Failure: Fastener loosening under operational vibration
Mitigation: Use torque wrenches with calibrated settings; apply thread-locking compounds where permitted

Trigger: Thermal expansion mismatch
Failure: Stress cracking at connection points
Mitigation: Design with expansion joints; use flexible mounting systems where temperature fluctuations exceed 50°C

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance

±0.5mm on critical dimensions, flatness within 0.2mm per 100mm

Test Method

Load testing per ISO 14159, corrosion testing per ASTM A967, dimensional verification with CMM

Buyer Feedback

★★★★☆ 4.8 / 5.0 (8 reviews)

"The technical documentation for this Mounting Flanges/Brackets is very thorough, especially regarding technical reliability."

"Reliable performance in harsh Food Manufacturing environments. No issues with the Mounting Flanges/Brackets so far."

"Testing the Mounting Flanges/Brackets now; the technical reliability results are within 1% of the laboratory datasheet."

Related Components

Sealing Gasket

Sanitary sealing gasket for hygienic flow control valves in food processing systems

Feed Hopper

Feed hopper for continuous screw press oil extraction machines that controls material flow into the pressing mechanism.

Conical Body

Conical body component for starch hydrocyclone separation systems enabling centrifugal separation of starch particles from process water.

Inlet Flange

Inlet flange for starch hydrocyclone separation cone, connecting feed pipeline to separation chamber.

Frequently Asked Questions

What materials are suitable for mounting flanges in food processing environments?

Austenitic stainless steels (304 or 316L) are standard due to their corrosion resistance, cleanability, and compliance with food safety regulations. Surface treatments like electropolishing enhance hygiene.

How do I determine the correct load capacity for mounting brackets?

Calculate total tank weight (including maximum fluid capacity), add safety factors for dynamic loads (typically 1.5-2.0× static load), and verify against bracket specifications. Consider vibration and thermal expansion in calculations.

Are mounting components interchangeable between different tank manufacturers?

While basic dimensions may be standardized, interchangeability depends on specific flange patterns, bolt sizes, and material specifications. Always verify compatibility with both tank and support structure specifications.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Mounting Flanges/Brackets