Support Plate: Thickness 2.0mm ±0.1mm

Component Specifications

Definition

The Support Plate is a critical structural component within lumbar support mechanisms, designed to distribute mechanical loads, maintain ergonomic alignment, and provide a stable mounting surface for adjustment mechanisms. It ensures consistent force transmission from the actuator to the lumbar region while resisting deformation under cyclic loading.

Working Principle

Operates on principles of static equilibrium and load distribution, transferring forces from adjustment mechanisms (e.g., motors, levers) to the lumbar support surface while maintaining structural integrity through rigid or semi-rigid material properties.

Materials

Typically cold-rolled steel (CRS) grade 1008/1010, aluminum alloy 6061-T6, or glass-filled polyamide (PA6-GF30) for lightweight applications. Thickness ranges from 1.5mm to 3.0mm.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Weight	80-200g depending on material
Hardness	HRB 70-85 (steel) or 80-95 HB (aluminum)
Thickness	2.0mm ±0.1mm
Load Capacity	≥ 1500N static, ≥ 500N cyclic
Surface Finish	Powder-coated or anodized, Ra ≤ 1.6μm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 12100, ISO 13849-1, DIN 5510-2

Parent Products

This component is used in the following industrial products

Lumbar Support Mechanism

Adjustable lumbar support mechanism for ergonomic task chairs, designed to maintain spinal curvature and reduce lower back strain.

View Product Details

Tube Supports

Structural components that secure and maintain the position of tubes within heat exchanger coils.

View Product Details

Engineering Analysis

Risks & Mitigation

Fatigue failure under cyclic loading
Corrosion in humid environments
Dimensional instability due to thermal expansion

FMEA Triads

Trigger: Material fatigue from repeated adjustment cycles
Failure: Crack propagation leading to structural failure
Mitigation: Use fatigue-resistant materials, implement stress-relief designs, and conduct regular durability testing.

Trigger: Inadequate corrosion protection
Failure: Reduced load capacity and premature failure
Mitigation: Apply appropriate coatings (e.g., zinc plating, powder coating) and specify corrosion-resistant alloys.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.2mm for critical dimensions, ±0.5° for angular features

Test Method

Static load testing per ISO 16840-3, fatigue testing with 100,000 cycles at 500N

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Support Plate

1 company lists this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.

Shanxi Haoyi Valve Pipe Pieces Co.,Ltd.

Shanxi, CN

Also makes: Valve Plug, Flat Washer

Listed on the company's own website · profile compiled by CNFX from public sources

Listed there as: “Support plate”
View source page ↗ goodwill-metal.com.cn · recorded 2026-10-11

View profile Send enquiry

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Side Rails

Side rails are structural components in seating module frames that provide lateral support and attachment points for other elements.

Edge Banding

Edge banding is a protective and decorative strip applied to exposed edges of furniture panels to conceal substrate materials and enhance durability.

Frequently Asked Questions

What is the primary function of a Support Plate in lumbar support mechanisms?

It distributes mechanical loads and provides a stable base for adjustment components, ensuring ergonomic alignment and durability.

Can Support Plates be interchanged between different lumbar support models?

No, they are typically model-specific due to variations in mounting points, curvature, and load requirements.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Support Plate