Cross Brace: Thickness 3mm to 12mm

Component Specifications

Definition

A cross brace is a diagonal structural member installed between vertical and horizontal frame elements to form triangular configurations, enhancing rigidity against lateral forces, torsion, and dynamic loads. It functions as a critical stability element in support frames by transferring shear forces and preventing deformation under operational stresses.

Working Principle

Operates on the principle of triangulation, where diagonal members convert lateral loads into axial tension or compression forces, distributing stresses efficiently across the frame structure to maintain geometric integrity and prevent buckling.

Materials

Typically manufactured from carbon steel (ASTM A36/A572), stainless steel (304/316), or aluminum alloys (6061-T6). Surface treatments include galvanization, powder coating, or anodizing for corrosion resistance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Length	Customizable from 500mm to 3000mm
Thickness	3mm to 12mm
Cross Section	Rectangular, circular, or L-shaped profiles
Load Capacity	Up to 15 kN axial load
Connection Type	Bolted, welded, or pinned ends

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 10721, DIN 18800

Parent Products

This component is used in the following industrial products

Support Frame

Structural component providing stability and load-bearing support within finishing assembly systems

View Product Details

Engineering Analysis

Risks & Mitigation

Over-tightening bolts causing stress concentrations
Corrosion in harsh environments reducing load capacity
Improper alignment leading to ineffective load transfer

FMEA Triads

Trigger: Material fatigue from cyclic loading
Failure: Crack propagation leading to brace fracture
Mitigation: Implement regular non-destructive testing (NDT) and use fatigue-resistant materials

Trigger: Inadequate corrosion protection
Failure: Section loss and reduced structural integrity
Mitigation: Apply appropriate coatings and conduct periodic inspections

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±1.5mm on length, ±0.5° on angular alignment

Test Method

Static load testing per ISO 10721, vibration testing to simulate operational conditions

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Cross Brace

2 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.

Guangzhou Shuangma Steel Template Co.,Ltd

Guangzhou, Guangdong, CN

Also makes: Access Ladder, Handrail System, Galvanized Steel Coil and 1 more

Listed on the company's own website · profile compiled by CNFX from public sources

Listed there as: “Snap On Cross Brace”
View source page ↗ gzshuangma.com · checked 2026-09-16

View profile Send enquiry

Wellmade

Tangshan, Hebei, CN

Also makes: Furniture Caster, Cotter Pin

Listed on the company's own website · profile compiled by CNFX from public sources

Listed there as: “cross braces”
View source page ↗ wm-scaffold.com · checked 2026-09-16

View profile Send enquiry

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What is the primary function of a cross brace in a support frame?

To provide lateral stability by resisting shear forces and preventing frame deformation under load.

Can cross braces be retrofitted to existing frames?

Yes, if the frame design allows for additional connections and load calculations confirm structural compatibility.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Cross Brace