Drive Motor Mounting: Weight Capacity 50-500 kg

Component Specifications

Definition

A structural component designed to securely position and support the drive motor on end trucks of overhead cranes, gantry cranes, and similar material handling equipment. It provides precise alignment between the motor shaft and driven components while absorbing operational vibrations and loads.

Working Principle

The mounting bracket transfers torque from the drive motor to the wheel assembly through a rigid mechanical interface while maintaining proper gear mesh alignment. It isolates motor vibrations from the end truck structure and provides thermal expansion accommodation for continuous operation.

Materials

ASTM A36 steel plate (10-20mm thickness) with ISO 898-1 Class 8.8 mounting bolts, zinc-plated for corrosion resistance

Technical Parameters

Parameter	Typical range	Notes & selection driver
Surface Finish	RAL 9005 powder coating
Weight Capacity	50-500 kg
Mounting Pattern	NEMA C-face compatible
Thermal Expansion	0.012 mm/°C coefficient
Vibration Damping	>85% isolation at 1000 RPM
Installation Torque	45-60 Nm for M10 bolts

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 12488-1, DIN 15018, ISO 4301-1, DIN 15020

Parent Products

This component is used in the following industrial products

End Trucks

Structural components at the ends of a crane bridge that support the bridge girders and house the wheels for horizontal movement along the runway rails.

View Product Details

Engineering Analysis

Risks & Mitigation

Fatigue cracking at weld joints
Bolt loosening due to vibration
Misalignment causing premature gear wear
Corrosion in humid environments

FMEA Triads

Trigger: Insufficient bolt torque during installation
Failure: Motor misalignment leading to gearbox damage
Mitigation: Use calibrated torque wrenches and implement torque verification procedures

Trigger: Thermal cycling in high-temperature environments
Failure: Weld fatigue and crack propagation
Mitigation: Design with expansion slots and use high-temperature rated materials

Trigger: Corrosive chemical exposure
Failure: Structural weakening and bolt seizure
Mitigation: Apply corrosion-resistant coatings and specify stainless steel fasteners

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5mm mounting hole position, ±0.2° angular alignment

Test Method

Static load test at 150% rated capacity, vibration test per ISO 10816-3, salt spray test per ASTM B117

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Drive Motor Mounting

Manufacturer profiles associated with Drive Motor Mounting.

Sourcing Drive Motor Mounting from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Mounting Interface

Precision mounting interface connecting punch tips to pharmaceutical tablet press machines for accurate tablet production.

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Frequently Asked Questions

What maintenance is required for drive motor mounting brackets?

Monthly visual inspection for cracks or deformation, quarterly torque check on mounting bolts, and annual alignment verification using laser alignment tools.

Can these mounts accommodate different motor sizes?

Standard mounts are designed for specific NEMA frame sizes, but adjustable versions with slotted holes are available for multiple motor configurations.

How does vibration damping affect motor performance?

Proper vibration isolation reduces bearing wear by up to 40%, extends motor life, and prevents resonance that could damage gear teeth.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Drive Motor Mounting