Feed Rollers / Grippers: Material Thickness Range 0.1-6 mm

Component Specifications

Definition

Feed rollers and grippers are mechanical components in coil feeding systems designed to precisely advance, grip, and position metal coils or other sheet materials during automated feeding processes. They ensure consistent material flow, prevent slippage, and maintain alignment for downstream operations like stamping, cutting, or forming.

Working Principle

Feed rollers rotate to pull material from the coil, while grippers clamp and release the material to control advancement. The system typically uses servo motors or pneumatic actuators for precise movement, with sensors providing feedback for position control and synchronization with other machine components.

Materials

Typically made from hardened steel (e.g., AISI 4140, D2 tool steel) or carbide for wear resistance. Surface treatments include chrome plating, nitriding, or ceramic coatings to reduce friction and extend lifespan. Rubber or polyurethane coatings may be used for non-marring applications.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Gripper Force	100-5000 N
Max Feed Speed	0.1-10 m/s
Roller Diameter	50-200 mm
Positioning Accuracy	±0.05 mm
Material Thickness Range	0.1-6 mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 12100, DIN 8580

Parent Products

This component is used in the following industrial products

Coil Feeding System

A mechanical system that precisely uncoils, straightens, and feeds metal strip material into a progressive stamping press at controlled speeds and positions.

View Product Details

Feeder Mechanism

A mechanical system that precisely feeds material into the stamping press at controlled intervals.

View Product Details

Engineering Analysis

Risks & Mitigation

Material slippage causing misalignment
Wear leading to reduced accuracy
Contamination affecting grip performance

FMEA Triads

Trigger: Insufficient roller pressure or worn surfaces
Failure: Material slippage during feeding
Mitigation: Regular inspection, proper tension adjustment, and surface replacement

Trigger: Misalignment of rollers or grippers
Failure: Uneven material feed or edge damage
Mitigation: Precision alignment during installation and periodic checks

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.1 mm for positioning, ±2% for speed consistency

Test Method

ISO 230-2 for positioning accuracy, DIN 55189 for wear testing

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Feed Rollers / Grippers

Manufacturer profiles associated with Feed Rollers / Grippers.

Sourcing Feed Rollers / Grippers from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the difference between feed rollers and grippers?

Feed rollers rotate to pull material continuously, while grippers clamp and release material intermittently for precise positioning. They often work together in coil feeding systems.

How often should feed rollers be maintained?

Inspect rollers every 500 operating hours for wear, alignment, and lubrication. Replace worn components based on material abrasiveness and usage intensity.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Feed Rollers / Grippers