Lid/Seal: Temperature Range -20°C to 150°C, Diameter 300-1200mm

Component Specifications

Definition

The Lid/Seal is a critical closure mechanism for industrial flux tanks, designed to create a hermetic seal between the tank body and access opening. It consists of a rigid lid structure with integrated sealing elements that compress against machined mating surfaces to prevent flux leakage, vapor escape, and external contamination. The component maintains consistent internal pressure and temperature conditions while allowing controlled access for maintenance and refilling operations.

Working Principle

The lid creates a mechanical seal through controlled compression of elastomeric gaskets against precision-machined flanges. When secured with fasteners or clamps, the sealing element deforms to fill microscopic surface imperfections, creating a continuous barrier. Pressure differentials enhance sealing effectiveness by forcing the gasket material into tighter contact with mating surfaces.

Materials

Lid body: 304/316 stainless steel (1.5-3mm thickness); Sealing element: EPDM rubber (70-80 Shore A), FKM fluorocarbon, or PTFE-coated composites; Fasteners: A2/A4 stainless steel; Optional coatings: PTFE or ceramic coatings for chemical resistance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Diameter	300-1200mm
Surface Finish	Ra 1.6-3.2μm
Pressure Rating	0-15 psi
Seal Compression	15-25%
Temperature Range	-20°C to 150°C
Flatness Tolerance	0.1mm/m

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2852, ISO 9626, DIN 11851, ASME BPE

Parent Products

This component is used in the following industrial products

Flux Tank

A reservoir component within a flux applicator system that stores and supplies flux material for application to surfaces.

View Product Details

Engineering Analysis

Risks & Mitigation

Chemical degradation of seal material
Improper installation causing leaks
Thermal expansion mismatch
Gasket compression set over time
Bolt fatigue from vibration

FMEA Triads

Trigger: Chemical incompatibility between seal material and flux
Failure: Seal swelling/cracking leading to leakage
Mitigation: Use chemical compatibility charts and select appropriate materials (EPDM, FKM, PTFE)

Trigger: Uneven bolt torque during installation
Failure: Asymmetric compression causing localized leaks
Mitigation: Use calibrated torque wrenches and follow cross-tightening patterns

Trigger: Thermal cycling exceeding material limits
Failure: Permanent deformation and loss of sealing force
Mitigation: Select materials with appropriate temperature ratings and consider expansion joints

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5mm for diameter, ±0.1mm for flatness, ±10% for compression force

Test Method

Pressure decay test (ISO 2852), helium leak test for critical applications, visual inspection for surface defects

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Lid/Seal

Manufacturer profiles associated with Lid/Seal.

Sourcing Lid/Seal from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Mounting Interface

Precision mounting interface connecting punch tips to pharmaceutical tablet press machines for accurate tablet production.

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Frequently Asked Questions

How often should flux tank seals be replaced?

Replace seals every 6-12 months or when compression set exceeds 15%. Regular inspection for cracks, swelling, or permanent deformation is recommended.

Can different sealing materials be used interchangeably?

No. Material compatibility depends on flux chemistry. EPDM works for water-based fluxes, FKM for solvent-based, and PTFE for aggressive chemicals. Always verify chemical compatibility charts.

What causes premature seal failure?

Common causes include improper installation torque, chemical incompatibility, excessive temperature, UV exposure, and surface imperfections on mating flanges.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Lid/Seal