Critical sealing component for pump heads and fluid blocks that prevents leakage and maintains pressure integrity in industrial fluid systems.
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Hardness | 70-90 Shore A | |
| Compression Set | <20% | |
| Pressure Rating | 0-1000 psi (varies by type) | |
| Tensile Strength | 10-25 MPa | |
| Temperature Range | -40°C to 300°C | |
| Elongation At Break | 150-400% |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
This component is used in the following industrial products
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
1 company lists this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Static seals are used between stationary components like flanges and housings, relying on compression to create a seal. Dynamic seals are used between moving parts like shafts and housings, requiring materials that can withstand friction while maintaining sealing integrity.
Replacement intervals depend on operating conditions, but typically range from 6 months to 3 years. Factors include fluid type, pressure, temperature, and mechanical wear. Regular inspection for leakage, wear, or compression set is recommended.
Common causes include improper installation, chemical incompatibility, excessive temperature, pressure spikes, shaft misalignment, abrasive particles in fluid, and incorrect material selection for the application.
Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.