INDUSTRY COMPONENT

Striking Surface/Anvil

The hardened surface in hammer/drill heads that receives direct impact to transfer force to workpieces.

View Specifications

Component Specifications

Definition
A precision-machined, hardened component in percussion tools that serves as the interface between the striking mechanism and the workpiece. It absorbs and redirects kinetic energy from the hammer mechanism to deliver controlled impact force for drilling, chiseling, or demolition applications.
Working Principle
Operates on momentum transfer principles: when the hammer mechanism strikes the anvil surface, kinetic energy is transferred through the component to the tool bit or accessory. The anvil's mass and hardness determine energy efficiency and impact force delivery.
Materials
High-carbon alloy steel (AISI 4140/4340), surface hardened to 55-60 HRC with through-hardened core (35-40 HRC) for fracture resistance. Premium versions use tool steel (D2, H13) or tungsten carbide inserts for extreme wear applications.
Technical Parameters
  • Core Hardness 35-40 HRC
  • Surface Finish Ra 0.8-1.6 μm
  • Surface Hardness 55-60 HRC
  • Weight Tolerance ±2%
  • Impact Resistance ≥150 J
  • Flatness Tolerance ±0.05 mm
Standards
ISO 28927-1, DIN 45635-1

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Striking Surface/Anvil.

hammer drill anvil striking surface component impact tool parts percussion mechanism demolition tool components industrial hammer parts Striking Surface/Anvil Striking Surface/Anvil in Machinery and Equipment Manufacturing

Parent Products

This component is used in the following industrial products

Hammer/Drill Head

The impact or drilling component of a piling rig that directly contacts and penetrates the ground.

View Product Details

Engineering Analysis

Risks & Mitigation
  • Fatigue fracture from cyclic loading
  • Surface spalling from contamination
  • Misalignment causing uneven wear
  • Overheating from continuous operation
FMEA Triads
Trigger: Material fatigue from cyclic impact loading
Failure: Crack propagation leading to catastrophic fracture
Mitigation: Regular inspection for surface cracks, proper heat treatment, and adherence to duty cycle limits
Trigger: Contaminants between striking surfaces
Failure: Accelerated wear and surface spalling
Mitigation: Clean mating surfaces regularly, use protective covers when not in use, implement contamination control procedures

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance
±0.1mm dimensional tolerance, ±0.05mm flatness, surface hardness within ±2 HRC of specification
Test Method
Ultrasonic testing for internal defects, dye penetrant for surface cracks, Rockwell hardness testing, dimensional verification with CMM

Buyer Feedback

★★★★☆ 4.6 / 5.0 (27 reviews)

"Great transparency on the Striking Surface/Anvil components. Essential for our Machinery and Equipment Manufacturing supply chain."

"The Striking Surface/Anvil we sourced perfectly fits our Machinery and Equipment Manufacturing production line requirements."

"Found 43+ suppliers for Striking Surface/Anvil on CNFX, but this spec remains the most cost-effective."

Related Components

Machine Frame
The rigid structural foundation of a CNC wood router that provides stability, vibration damping, and precision alignment for cutting operations.
pH Sensor Assembly
Precision pH sensor assembly for automated monitoring and dosing systems in industrial applications
Load Cell Assembly
Precision load cell assembly for automated powder dispensing systems
Dust Collection Port
A dust collection port is a critical component in automated powder dispensing systems that captures airborne particulates at the source to maintain clean air quality and prevent cross-contamination.

Frequently Asked Questions

What causes premature wear on striking surfaces?

Primary causes include improper material hardness (too soft wears quickly, too hard becomes brittle), contamination between surfaces, misalignment causing uneven impact distribution, and exceeding rated impact energy limits.

How often should striking surfaces be inspected?

Visual inspection every 50 operating hours for surface cracks or deformation. Dimensional inspection every 200 hours or 6 months. Replace when surface wear exceeds 0.5mm depth or cracks are visible.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Get Quote for Striking Surface/Anvil

Strike-off Plate Stripper Plate