Tip (Point): Weight Range 15-50 kg, Point Angle 30-60 degrees

Component Specifications

Definition

A ripper tip is a precision-engineered wear component that attaches to the shank of a ripper tooth on earthmoving machinery. It features a tapered design with a hardened point that concentrates force to fracture rock, concrete, frozen ground, and other compacted materials through mechanical leverage and impact. The tip is subjected to extreme abrasion and shock loads during operation.

Working Principle

The ripper tip operates on the principle of concentrated force application. As the ripper shank is pulled through material, the tip's narrow point creates high pressure per unit area, exceeding the compressive strength of the material to initiate cracks. The tapered geometry then wedges into these cracks, using the machine's hydraulic force to propagate fractures and break apart the material through tensile and shear failure.

Materials

High-alloy abrasion-resistant steel (AR400, AR500, or equivalent), often with carbide inserts or hardfacing (tungsten carbide) on critical wear surfaces. Typical hardness: 400-500 HB. May include through-hardening or specialized heat treatments for impact resistance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Point Angle	30-60 degrees
Service Life	50-200 operating hours depending on material
Weight Range	15-50 kg
Mounting Type	Pin-on or bolt-on
Compatible Shank Size	Matches ripper tooth profile (e.g., CAT, Komatsu specifications)

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ASTM A514

Parent Products

This component is used in the following industrial products

Ripper

A heavy-duty attachment mounted on the rear of a bulldozer designed to break up and loosen compacted soil, rock, or pavement.

View Product Details

Engineering Analysis

Risks & Mitigation

Tip fracture under excessive load
Premature wear in highly abrasive materials
Improper installation leading to detachment
Material fatigue from cyclic loading

FMEA Triads

Trigger: Impact overload from hitting immovable obstacles
Failure: Catastrophic tip fracture or bending
Mitigation: Use tips with proper hardness-toughness balance; implement operator training on gradual engagement.

Trigger: Abrasive wear in rocky soils
Failure: Progressive blunting reduces penetration efficiency
Mitigation: Select tips with carbide inserts or hardfacing; rotate or replace tips before excessive wear.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Dimensional tolerance ±2 mm on critical mounting surfaces; hardness tolerance ±10 HB as per material specification

Test Method

Hardness testing (Rockwell or Brinell), dimensional inspection via CMM, non-destructive testing (magnetic particle or dye penetrant) for cracks

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Tip (Point)

Manufacturer profiles associated with Tip (Point).

Sourcing Tip (Point) from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

How often should ripper tips be replaced?

Replacement frequency depends on material hardness and operating conditions. Typically, inspect after 50 hours of use in abrasive environments. Replace when wear reduces the point length by 30% or when cracking occurs.

Can ripper tips be reconditioned?

Yes, tips with minor wear can be rebuilt using hardfacing welding techniques to extend service life. However, severely worn or cracked tips should be replaced for safety and performance.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Tip (Point)