This page explains how Road Milling Machine is classified within Repair and Installation of Machinery and Equipment. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
A heavy-duty construction machine used to remove and recycle asphalt or concrete pavement surfaces.
Technical details and manufacturing context for Road Milling Machine
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Milling WidthRequired | 1000–2000 mm | Maximum width of pavement that can be milled in a single pass |
| Milling DepthRequired | 0–300 mm | Maximum depth of pavement removal capability |
| Engine PowerRequired | 200–500 kW | Power output of the main diesel engineISO 3046-1 |
| Operating WeightRequired | 15000–30000 kg | Total weight of the machine including standard equipment |
| Travel SpeedRequired | 0–5 m/min | Maximum forward and reverse travel speed |
| Hydraulic System Pressure | 20–35 MPa | For milling drum drive and auxiliary functionsISO 4413 |
| Water Consumption | 200–500 L/min | For dust suppression and cooling |
| Fuel Tank Capacity | 300–600 L | Enables extended operation |
| Operating Temperature | -20–50 °C | For hydraulic and engine systems |
| Ingress Protection | IP54–IP65 | For electrical componentsIEC 60529 |
| Noise Level | 100–120 dB(A) | At operator ear, requires hearing protectionISO 6395 |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
Commonly used trade names and technical identifiers for Road Milling Machine.
| pressure: | Up to 350 bar (hydraulic system max) |
| flow rate: | 100-400 L/min (hydraulic oil flow) |
| temperature: | -20°C to 50°C (operational ambient range) |
| slurry concentration: | Up to 40% solids by weight (for slurry handling systems) |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
2 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.
Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.
A practical evidence checklist for RFQ preparation and supplier evaluation.
CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.
The milling width typically ranges from 1000 to 2000 mm, depending on the model. This is the maximum width of pavement that can be milled in a single pass. Always verify the exact width for the specific machine model with the manufacturer.
The milling depth is controlled via hydraulic or electronic systems that adjust the drum's position relative to the pavement surface. The machine can mill to depths ranging from 0 to 300 mm, but the exact capability depends on the model and conditions.
Operators must wear hearing protection as noise levels can reach 100–120 dB(A). Additionally, follow all manufacturer safety guidelines, including proper training, use of personal protective equipment, and adherence to site safety protocols.
Yes, the milled aggregate is typically conveyed to a dump truck and can be recycled for use in new pavement or other applications. The recycling process depends on local regulations and the condition of the material.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.