INDUSTRY COMPONENT

Moisture Content

Moisture content measures water percentage in industrial-grade polyvinyl alcohol binder powder, critical for product performance and processing.

Component Specifications

Definition
Moisture content is a key quality parameter in industrial-grade polyvinyl alcohol (PVA) binder powder, representing the mass percentage of water present in the material. It directly affects viscosity, solubility, adhesive strength, and storage stability. Precise control is essential for consistent manufacturing outcomes in applications like adhesives, coatings, and textiles.
Working Principle
Moisture content is determined through loss-on-drying methods, where a sample is heated to evaporate water, and the weight loss is measured. Advanced techniques include Karl Fischer titration for higher accuracy, especially at low moisture levels.
Materials
Industrial-grade polyvinyl alcohol (PVA) binder powder, typically with hydrolysis degrees of 87-99% and viscosity ranges of 4-65 mPa·s (4% aqueous solution at 20°C).
Technical Parameters
ParameterTypical rangeNotes & selection driver
Sample Size2-5 grams
Optimal Range1.0-3.0%
Typical Range0.5-5.0%
Drying Temperature105±2°C
Measurement Accuracy±0.1%

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards
ISO 15512, ASTM D6980, DIN 53145

Parent Products

This component is used in the following industrial products

Engineering Analysis

Risks & Mitigation
  • Excessive moisture leading to microbial growth
  • Inconsistent adhesive strength
  • Processing issues like clogging in equipment
FMEA Triads
Trigger: Improper storage conditions (high humidity)
Failure: Increased moisture beyond specs, causing poor solubility
Mitigation: Use desiccants and sealed containers; monitor storage environment
Trigger: Inaccurate measurement calibration
Failure: False readings leading to quality deviations
Mitigation: Regular calibration of moisture analyzers per manufacturer guidelines

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance
±0.5% from target value
Test Method
Loss-on-drying at 105°C for 2 hours or Karl Fischer titration for precision

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation
Request current drawings, revision history, and a signed specification sheet.
Manufacturing capability
Verify equipment lists, process limits, capacity, and representative production evidence.
Inspection readiness
Confirm test methods, calibrated equipment, sampling plans, and traceable reports.
Supplier transparency
Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Moisture Content

2 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.

SuccessCrete
Guangzhou, Guangdong, CN
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “C. Moisture content:”
View source page ↗ successcrete.com · recorded 2026-09-16
Zhejiang Bocon Intelligent Equipment Co., Ltd.
Hangzhou, Zhejiang, CN
Listed on the company's own website · profile compiled by CNFX from public sources
Listed there as: “Moisture Content”
View source page ↗ hzbocon.com · recorded 2026-09-15

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Related Components

Fume Extraction Hood
A fume extraction hood is a critical safety component that captures and removes hazardous chemical vapors, fumes, and particulates generated during automated chemical drum filling and sealing operations.
RTD Temperature Sensor
High-precision platinum-based temperature sensor for industrial chemical heating systems
Safety Enclosure & Ventilation
Safety enclosure and ventilation system for automated chemical storage and retrieval systems, designed to contain hazardous materials and maintain safe air quality.
Management Software License
Digital license enabling access to management software for automated chemical drum labeling and tracking systems.

Frequently Asked Questions

Why is moisture content critical in PVA binder powder?

It affects solubility, viscosity, adhesive properties, and shelf life; high moisture can cause clumping or reduced performance.

How is moisture content measured in industrial settings?

Commonly via loss-on-drying ovens or Karl Fischer titrators, following standards like ISO 15512 for accuracy.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification
This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Request Manufacturing Insight for Moisture Content

Thank you. Your request has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at [email protected].
Tube Sheets / Headers
Get QuotesChat