Vertical form fill seal packaging machines · Film width against bag size, bag style, continuous versus intermittent motion, speed, dosing system, air and power
A vertical form fill seal (VFFS) machine pulls flat film from a roll over a forming collar and tube, seals it into a vertical tube, drops a dosed product charge into it and seals and cuts each bag, in one vertical cycle. Fix three things before asking for a quotation: the bag size and style — which set the film width and forming set — the product and the dosing system (multihead weigher, auger, cup, liquid pump) that will sit above the machine, and the speed, motion type and utilities the line needs.
Vertical form fill seal machines for pillow, gusset, quad, block-bottom and similar bags, with their forming sets and sealing jaws. Dosing systems sold alone, premade-pouch (doypack) machines, horizontal flow wrappers and stick-pack machines are outside this page; powder packaging machines and stick-pack machines have their own pages.
Start with your task
01
Jintian lists its JT-520 VFFS for bags 80–370 mm long and 60–250 mm wide on a maximum film width of 520 mm, and its JT-720 for bags 80–470 mm long and 100–350 mm wide on 720 mm film, both at 5–60 bags per minute, for products from snacks, nuts and candy to frozen food, powders and liquids. [1] [2] The JT-720 page's comparison table gives the JT-520 width range as 80–250 mm and its power as 2.7 kW, against 60–250 mm and 3 kW on the JT-520's own page. [2] [1]
Jochamp lists the bag styles a VFFS can form: wide-top, flat or pillow, zip-lock, block-bottom, gusset, quattro (quad-seal), chain, three-side-seal, punch-hole, hem-seal, stand-up and brick-shaped bags. It asks for product type and dimensions, bag style, capacity and installation space for a quotation. [3]
Editorial calculation: a pillow bag is formed from film wrapped around the forming tube, so its film width is a little over twice the bag width plus the fin-seal allowance. Jintian's pairing of a 250 mm maximum bag width with 520 mm film and 350 mm with 720 mm leaves 20 mm in each case, consistent with that. Confirm the exact film width with the maker for your bag and seal type. [1] [2]
Editorial note: where a supplier's own pages disagree, as in the JT-520 width and power figures above, ask for the figures to be confirmed in the quotation's technical annex.
Give the supplier the product and its bulk density or piece size, fill weight or volume, bag style and size range, film structure and thickness, required speed in bags per minute, dosing system (weigher, auger, cup, pump), date coding and gas flushing needs, utilities (power, compressed air), space and quantity.
02
Jochamp explains that intermittent-motion VFFS machines make the vertical seal while the film moves and the horizontal seal while it stops, suiting applications that do not need high speed and products that are not fragile; continuous-motion machines make both seals while the film keeps moving, for higher speeds, and it recommends them for delicate products. [3]
Jintian lists compressed air at about 0.4 m³/min (at 0.65 MPa on the JT-520 page, 1.0 MPa on the JT-720 table), 220 V 50/60 Hz power at 2.7–3 kW, machine footprints of about 1.5–1.7 m by 1.17–1.27 m, and weights of 800–900 kg. It cites a PLC, double servo film pull-down, automatic film correction and bag clamping to avoid broken bags. [1] [2]
Editorial calculation: at 60 bags per minute a machine produces up to 3,600 bags an hour, so an 8-hour shift at full speed would be about 28,800 bags before changeovers and stoppages. [1]
03
Viking Masek publishes two versions of one stainless steel, closed-frame bagger. The "M300i" lists a maximum intermittent speed of 120 bpm and offers a continuous mode upgrade; the "M300c" is described as a continuous motion VFFS bagger at speeds up to 200 BPM. Both list bag sizes from 60 mm x 60 mm to 300 mm x 400 mm, a weight of 2100 lbs and a power supply of 7.9 kVA (480 V, 3 phase, 60 Hz., 10 AMPS). [4] [5]
The pair matches the trade-off Jochamp describes: intermittent machines make the horizontal seal while the film stops, and continuous machines seal while the film keeps moving, for higher speeds [3]. On Viking Masek's figures the continuous version of the same frame and bag range is rated 80 bpm faster [4] [5]. Ask the supplier which motion the quoted speed applies to, and for the speed with your product, film and bag length.
The utility figures are published in North American units and supply ratings, while Jintian quotes 220 V 50/60 Hz and about 0.4 m³/min of air [1] [2]. The M500 asks for 12-18 SCFM at 90 PSI without vacuum and 208-240V single phase at 60 Hz [6]; the M300 models list 480 V three phase [4]. Confirm voltage, phase and frequency against the plant supply before ordering, and check whether a 60 Hz rating needs changes for a 50 Hz grid.
Editorial calculation: 200 bpm minus 120 bpm is 80 bpm, a two-thirds increase over the intermittent figure; 2100 lbs at 0.4536 kg per lb is about 953 kg. [4] [5]
| Item | M300i | M300c | M500 |
|---|---|---|---|
| Motion and max speed | Intermittent, 120 bpm | Continuous, 200 bpm | 70 bpm |
| Bag size (min / max) | 60 mm x 60 mm / 300 mm x 400 mm | 60 mm x 60 mm / 300 mm x 400 mm | 150 mm x 100 mm / 500 mm x 600 mm |
| Bag styles named | — | — | Quad seal, flat bottom, stand-up |
| Film roll | — | — | Max roll diameter 500 mm; max roll width 1,030 mm |
| Power supply | 7.9 kVA, 480 V, 3 phase, 60 Hz, 10 A | 7.9 kVA, 480 V, 3 phase, 60 Hz, 10 A | 208-240V, single phase, 60 Hz, 20 A |
| Air | — | — | 12-18 SCFM @ 90 PSI w/o vac |
| Weight | 2100 lbs | 2100 lbs | — |
Values are from Viking Masek product pages; the specification PDFs were not reviewed.
04
Suppliers linked to this page list VFFS machines; each card links to the page reviewed.
The listings reviewed range from single VFFS units to complete weighing and packaging lines, inclined and multilane machines; ask each for bag size range per forming set, speed with your product and film, air and power, and the dosing system included.
05
This is a functional reference built from the sources cited; it is not one maker's specification.
| Part | Role | Fix in the order |
|---|---|---|
| Film unwind and correction | Keeps film tracking. [2] | Reel size; correction. |
| Forming collar and tube | Sets bag width and style. [3] [1] | Forming sets. |
| Film pull-down | Servo belts index film. [2] | Drive type. |
| Vertical and horizontal jaws | Seal and cut; motion type. [3] | Continuous or intermittent. |
| Dosing system | Weigher, auger, cup or pump above. [3] | System; accuracy. |
| Controls | PLC and HMI. [2] | Recipes; languages. |
06
A VFFS quotation needs values for your product and bags. The table explains each field, gives published values where a reviewed source states them, and says what to obtain from the supplier.
| Field | What it means and published values | Ask the supplier for |
|---|---|---|
| Bag Width Range (mm) | 60/80–250 (JT-520); 100–350 (JT-720). [1] [2] | Per forming set. |
| Bag Length Range (mm) | 80–370; 80–470. [1] [2] | Range. |
| Film Width Range (mm) | Max 520; 720. [1] [2] | Max and min. |
| Filling Speed (bags/min) | 5–60 [1]; 120 intermittent, 200 continuous on one frame. [4] [5] | With your product. |
| Sealing Temperature (°C) | Set by film structure. | Jaw temperature range. |
| Air Consumption (m³/min) | About 0.4. [1] [2] | Flow at pressure. |
| Operating Pressure (MPa) | 0.65 or 1.0 stated. [1] [2] | Required pressure. |
| Power Supply (V AC) | 220 V 50/60 Hz [2]; 480 V 3 phase or 208-240V single phase, 60 Hz. [4] [6] | Voltage; phases. |
| Installed Power (kW) | 2.7–3. [1] [2] | Total with dosing. |
| Machine Weight (kg) | 800–900. [1] [2] | Weight. |
| Dimensions (L×W×H) (mm) | About 1,500–1,700 × 1,170–1,270 × 1,500–1,900. [1] [2] | Layout. |
| Noise Level (dB(A)) | At operator position. | Value. |
| IP Rating | Washdown needs. | Rating. |
07
Paste it into your enquiry below or into an email to a maker, then replace every bracket.
Product: [type; density; piece size] Fill: [weight or volume; accuracy] Bag: [style; width; length] Film: [structure; thickness; reel] Speed: [bags/min] Dosing: [weigher; auger; cup; pump] Options: [coder; gas flush; zipper] Utilities: [power; air; space]
These companies list vertical form fill seal machines.
Lists JT-420, JT-520 and JT-720 vertical form fill seal machines, stick-pack and powder packaging machines.
Product scope checked 2026-10-11
Lists vertical form fill seal machines for a wide range of bag styles.
Product scope checked 2026-10-11
Lists vertical form fill seal machines, including inclined VFFS for fragile items.
Product scope checked 2026-10-11
Lists VFFS vertical packaging machines for chips, liquids and other products.
Product scope checked 2026-10-11
Lists vertical form fill seal (VFFS) and horizontal packaging machines.
Product scope checked 2026-10-11
Lists vertical form fill seal machines, including multilane and pouch versions.
Product scope checked 2026-10-11
Lists vertical form fill seal machines alongside premade-pouch packaging machines.
Product scope checked 2026-10-11
Lists vertical packaging machines and vertical weighing and packaging systems with multihead weighers.
Product scope checked 2026-10-11
Lists sachet packaging machines for powders and granules.
Product scope checked 2026-10-11
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Jochamp says intermittent machines seal horizontally with the film stopped, while continuous machines seal on moving film for higher speed. [3]
Jochamp lists pillow, gusset, block-bottom, quattro, zip-lock, stand-up and other styles. [3]
Sources checked 2026-10-12. Jintian and Jochamp are VFFS makers publishing model specifications and motion-type explanations; both are linked suppliers.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
Compare manufacturer profiles with relevant product and process capability.