Measurement Probe: Probe Diameter 8-12 mm, Power Supply 24 V DC

Q: How often should the measurement probe be calibrated?

Calibration should be performed every 3-6 months or after 5000 measurements, using certified reference materials to maintain accuracy.

Q: Can this probe measure moisture in different types of leather?

Yes, it is designed for various leather types including full-grain, corrected-grain, and suede, with adjustable calibration settings for material-specific properties.

Q: What maintenance is required for the probe?

Regular cleaning with isopropyl alcohol, inspection for electrode wear, and verification of seal integrity to prevent contamination and ensure consistent performance.

Component Specifications

Definition

A specialized measurement probe designed for leather moisture content analyzers, utilizing advanced sensing technology to detect and quantify water content in leather hides and products with high accuracy. This component is critical for quality control in leather manufacturing, ensuring optimal moisture levels for processing, finishing, and storage.

Working Principle

Operates on the principle of electrical impedance or capacitance measurement. The probe applies a low-voltage signal to the leather surface, measuring the dielectric constant or conductivity, which correlates directly with moisture content. Changes in electrical properties are converted into precise moisture percentage readings through calibrated algorithms.

Materials

Stainless steel 316L housing, platinum or gold-plated electrodes, ceramic insulation, high-temperature resistant polymers (PEEK or PTFE) for seals, corrosion-resistant coatings.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Accuracy	±0.5%
Resolution	0.1%
Power Supply	24 V DC
Output Signal	4-20 mA or 0-10 V DC
Response Time	<2 seconds
Probe Diameter	8-12 mm
Measurement Range	0-50% moisture content
Protection Rating	IP67
Operating Temperature	-10°C to 80°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2419, ISO 17226, DIN 53345, ASTM D6655

Parent Products

This component is used in the following industrial products

Leather Moisture Content Analyzer

Non-destructive analyzer measuring moisture content in leather during processing

View Product Details

Thickness Measurement Sensor

A sensor that measures the thickness of battery electrode materials during the calendering process.

View Product Details

Engineering Analysis

Risks & Mitigation

Electrode corrosion from chemical exposure
Calibration drift over time
Mechanical damage from improper handling
Signal interference in high-humidity environments

FMEA Triads

Trigger: Exposure to harsh chemicals during leather treatment
Failure: Electrode corrosion leading to inaccurate readings
Mitigation: Use chemical-resistant coatings and implement regular inspection protocols

Trigger: Prolonged use without recalibration
Failure: Measurement drift beyond acceptable tolerance
Mitigation: Establish scheduled calibration cycles and use automated calibration reminders

Trigger: Physical impact during handling
Failure: Probe housing damage or electrode misalignment
Mitigation: Implement protective storage procedures and operator training on proper handling

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5% moisture content across full measurement range

Test Method

Comparative analysis against gravimetric (oven-dry) method per ISO 2419 standards

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Measurement Probe

Manufacturer profiles associated with Measurement Probe.

Sourcing Measurement Probe from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Chromium Sulfate Complex

Chromium sulfate complex is a key chemical component in chrome tanning solutions used for leather processing.

Frequently Asked Questions

How often should the measurement probe be calibrated?