Gasket Seals: Temperature Range -50°C to 450°C

Component Specifications

Definition

Gasket seals are specialized sealing components designed to prevent fluid or gas leakage between two or more mating surfaces in a plenum chamber assembly. They compensate for surface irregularities, thermal expansion, and mechanical vibrations while maintaining pressure integrity. In industrial applications, these seals ensure operational safety, efficiency, and environmental compliance by containing media within designated flow paths.

Working Principle

Gasket seals operate on the principle of compressive sealing, where applied bolt load deforms the gasket material to fill microscopic imperfections on flange surfaces. This creates a barrier that prevents media passage through the interface. The seal maintains integrity through elastic recovery properties that accommodate thermal cycling and pressure fluctuations without permanent deformation.

Materials

Common materials include: Compressed Non-Asbestos Fiber (CNAF) for general applications, Graphite for high-temperature resistance (up to 450°C), PTFE for chemical resistance, Metal-reinforced composites for high-pressure applications, Silicone rubber for flexible sealing, EPDM for weather and ozone resistance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Compression Set	<15%
Pressure Rating	Up to 300 bar
Tensile Strength	>10 MPa
Temperature Range	-50°C to 450°C
Thickness Tolerance	±0.1 mm
Chemical Compatibility	Resistant to oils, fuels, and mild acids

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 9001, ISO 14001, DIN 3754, DIN 2690, ASME B16.21

Parent Products

This component is used in the following industrial products

Plenum Chamber

A plenum chamber is a component used in air distribution systems, specifically within Air Distribution Plenum & Nozzles setups.

View Product Details

Engineering Analysis

Risks & Mitigation

Improper installation leading to leaks
Material degradation from chemical exposure
Thermal cycling causing fatigue failure
Incorrect torque application during installation
Incompatible gasket material with operating media

FMEA Triads

Trigger: Insufficient bolt torque during installation
Failure: Seal leakage due to inadequate compression
Mitigation: Follow manufacturer torque specifications and use calibrated torque wrenches

Trigger: Chemical attack from incompatible media
Failure: Material degradation and seal failure
Mitigation: Select chemically resistant materials and verify compatibility charts

Trigger: Thermal cycling beyond material limits
Failure: Loss of elasticity and compression set
Mitigation: Use temperature-appropriate materials and consider thermal expansion in design

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Dimensional tolerance per DIN 2690, surface finish Ra ≤ 3.2 μm, flatness within 0.1 mm per 100 mm

Test Method

Pressure testing per ISO 9001, leak detection using helium mass spectrometry, compression set testing per ASTM F36, chemical resistance testing per ASTM D471

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Gasket Seals

1 company lists this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.

Xingtai Honglei Seal Manufacturing Co., Ltd.

Xingtai, Hebei, CN

Also makes: Construction Equipment, Hydraulic Pump, Sealing Head and 2 more

Listed on the company's own website · profile compiled by CNFX from public sources

Listed there as: “Compound Gasket Seals”
View source page ↗ china-oilseals.com · checked 2026-09-13

View profile Send enquiry

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the primary function of gasket seals in plenum chambers?

Gasket seals prevent leakage of air, gases, or fluids between mating surfaces in plenum chambers, ensuring pressure integrity and operational efficiency while containing media within designated flow paths.

How do I select the right gasket material for my application?

Consider operating temperature, pressure, media compatibility, flange surface condition, and environmental factors. Consult material specifications and industry standards like DIN 3754 for guidance on material selection.

What maintenance is required for gasket seals?

Regular inspection for compression set, surface degradation, and leakage. Replacement during scheduled maintenance or when seals show signs of wear, typically every 1-3 years depending on operating conditions.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Gasket Seals