Transport Tubing: temperature_range -40°C to 200°C

Component Specifications

Definition

A precision-engineered tubular component designed to transport air samples from collection points to aspirated detectors in industrial sampling systems. It maintains sample integrity by preventing contamination, adsorption, or chemical reactions during transit, ensuring accurate detection of gases, particulates, or vapors in manufacturing environments.

Working Principle

Operates on pneumatic transport principles, using pressure differentials or vacuum systems to move air samples through the tubing. The smooth inner surface minimizes turbulence and pressure drop, while the material composition prevents sample degradation. Proper diameter and length are calculated to maintain flow rates that match detector sampling requirements.

Materials

Typically made from chemically inert materials: PTFE (Teflon) for corrosive gases, stainless steel 316L for high-temperature applications, silicone for flexibility, or FEP for transparency. Material selection depends on chemical compatibility, temperature range (-40°C to 200°C), and pressure requirements (vacuum to 10 bar).

Technical Parameters

Parameter	Typical range	Notes & selection driver
Length	1-50 meters
Bend Radius	5x diameter minimum
Inner Diameter	4-12 mm
Wall Thickness	1-2 mm
Pressure Rating	Vacuum to 10 bar
Surface Roughness	Ra ≤ 0.8 μm
Temperature Range	-40°C to 200°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 11439, DIN 74324, ASTM D876

Parent Products

This component is used in the following industrial products

Sampling System (for aspirated detectors)

A system that actively draws air samples from monitored areas to aspirated gas detectors for analysis.

View Product Details

Engineering Analysis

Risks & Mitigation

Sample contamination from material outgassing
Pressure drop causing flow rate reduction
Cracking at connection points
Chemical degradation from aggressive compounds

FMEA Triads

Trigger: Material incompatibility with sampled gases
Failure: Tubing degradation and sample contamination
Mitigation: Use chemical compatibility charts and select appropriate materials (PTFE for most applications)

Trigger: Improper installation with tight bends
Failure: Flow restriction and pressure drop
Mitigation: Maintain minimum bend radius of 5x diameter and use proper supports

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.1 mm inner diameter, ±0.05 mm wall thickness

Test Method

Pressure testing per ISO 11439, leak testing with helium mass spectrometer, material verification via FTIR spectroscopy

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Transport Tubing

Manufacturer profiles associated with Transport Tubing.

Sourcing Transport Tubing from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

How often should transport tubing be replaced in sampling systems?

Replacement depends on usage and material: PTFE tubes last 2-5 years with regular maintenance, while silicone may need annual replacement. Inspect quarterly for cracks, discoloration, or contamination.

Can different tubing materials affect detection accuracy?

Yes. Material adsorption can retain target compounds. PTFE has low adsorption for most gases, while some plastics may absorb VOCs. Always match tubing material to the sampled substances.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Transport Tubing