Dampers/Regulators

Product Specifications

Technical details and manufacturing context for Dampers/Regulators

Definition

Dampers/Regulators are essential components in forced air circulation systems that manage airflow volume, direction, and pressure. They function as adjustable valves or louvers within ductwork, allowing precise control over air distribution to different zones, balancing system performance, and enabling isolation of specific sections for maintenance or efficiency. These devices are typically constructed from galvanized steel, aluminum, or stainless steel, with body materials such as WCB, CF8, or CF8M, and seat materials like PTFE or EPDM. They are available in nominal sizes from DN50 to DN600, operating pressures from 1.0 to 1.6 MPa, and temperatures from -40°C to 85°C. Leakage rates range from 0.1% to 1.0% (Class A for high-performance dampers), and actuator torque requirements vary from 10 to 200 N·m. Response times for full open/close stroke are typically 2 to 10 seconds. Control signals are analog (0/4–20 mA) per IEC 60381, and electric actuators operate on 24 V DC (±10%). Enclosure ratings range from IP54 to IP65, with IP65 suitable for outdoor use. Weight varies from 5 to 150 kg depending on size and material. Standards referenced include ISO 6708 for nominal size, and leakage testing, IEC 60381 for control signals, and IEC 60529 for enclosure protection. These specifications serve as general reference ranges; actual values must be confirmed with the manufacturer for specific models and applications. Dampers are used in HVAC systems, industrial ventilation, and process air handling to balance airflow, maintain pressure differentials, and isolate sections for maintenance. Proper selection requires consideration of duct size, system pressure, temperature, control requirements, and environmental conditions. Regular inspection and maintenance are necessary to ensure reliable operation, as seal wear, actuator failure, or blade deformation can affect performance. Always verify model-specific data and compliance with applicable standards through the legal manufacturer or supplier.

Working Principle

Dampers operate by physically obstructing the airflow path within a duct. Manual, motorized, or automatic actuators adjust the position of blades, louvers, or plates to increase or decrease the open cross-sectional area, thereby regulating airflow rate and pressure based on control signals or manual settings. The actuator torque (10–200 N·m) must be sufficient to overcome resistance from air pressure and seal friction. Response time (2–10 s) indicates how quickly the damper moves from fully open to fully closed. Leakage rate (0.1–1.0%) measures the amount of air that passes when the damper is closed, with Class A indicating high-performance sealing. Control signals (0/4–20 mA) provide analog input for precise positioning. The enclosure rating (IP54–IP65) protects the actuator from dust and moisture, with IP65 for outdoor use. Proper operation depends on correct installation, alignment, and actuator sizing.

Common Materials

Galvanized Steel, Aluminum, Stainless Steel

Technical Parameters

Parameter	Typical range	Notes & selection driver
Nominal Size	DN50–DN600 mm	Standard sizes for duct connectionsISO 6708
Operating Temperature	-40–85 °C	Above 85°C may damage seals
Leakage Rate	0.1–1.0 %	Class A for high-performance dampers
Actuator Torque	10–200 N·m	Required for proper closure
Response Time	2–10 s	For full open/close stroke
Control Signal	0/4–20 mA	Analog control inputIEC 60381
Supply Voltage	24 ±10% V DC	For electric actuators
Enclosure Rating	IP54–IP65	IP65 for outdoor useIEC 60529
Body Material	WCB/CF8/CF8M	Carbon steel or stainless steelASTM A216/A351
Seat Material	PTFE/EPDM	PTFE for high temp, EPDM for low cost
Weight	5–150 kg	Depends on size and material

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Components / BOM

Damper Frame
Structural housing that mounts within the ductwork and supports the blade assembly.

Material: Galvanized Steel
Blade Assembly
Set of adjustable blades or louvers that rotate to modulate airflow; includes blade shafts and linkage.

Material: Galvanized Steel
Seals/Gaskets Part
Provide an airtight seal around the blade edges when closed to minimize leakage.

Material: Neoprene or Silicone Rubber
Actuator/Linkage
Mechanism (manual lever, motor, pneumatic cylinder) that converts control input into blade movement.

Material: Steel, Aluminum, Plastic

Applied To / Applications

This component is essential for the following industrial systems and equipment:

Forced Air Circulation System

View system integration details

Manufacturers of Dampers/Regulators

Manufacturer profiles associated with Dampers/Regulators.

Sourcing Dampers/Regulators from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Frequently Asked Questions

What are the typical applications of dampers/regulators?

Dampers/regulators are used in forced air circulation systems such as HVAC, industrial ventilation, and process air handling to control airflow volume, balance system performance, and isolate sections for maintenance.

What materials are commonly used for dampers?

Common materials include galvanized steel, aluminum, and stainless steel for the body, with body material grades like WCB, CF8, or CF8M. Seat materials may be PTFE or EPDM, depending on temperature and cost requirements.

How do I select the right damper for my system?

Selection requires considering duct size (nominal size DN50–DN600), operating pressure (1.0–1.6 MPa), temperature range (-40°C to 85°C), required leakage rate, actuator torque, response time, control signal type, and enclosure rating. Always verify with the manufacturer for specific applications.

What maintenance is required for dampers?

Regular inspection of seals, blades, and actuators is recommended. Look for signs of wear, leakage, or sluggish operation. Ensure actuator torque is adequate and control signals are functioning. Follow manufacturer guidelines for lubrication and part replacement.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Buyer enquiry

Request manufacturing insight for Dampers/Regulators

Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.

Where it goes: Straight to the CNFX editorial desk, and to the manufacturer if this product is linked to a claimed profile. Nothing is broadcast to a supplier list.
Your details stay here: We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman: CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What we don't claim: A listing is not an endorsement. Qualify every supplier and verify every figure yourself before ordering.

pressure:	Up to 25 psig (1.72 bar)
flow rate:	0 to 50,000 CFM
temperature:	-40°C to 400°C
slurry concentration:	Not applicable (air/gas only)

Product Specifications

Applied To / Applications

Industrial Ecosystem & Supply Chain Structure

Application Fit & Sizing Matrix

Reliability & Engineering Risk Analysis

Compliance & Manufacturing Standards