Shaft Cooling System: Cooling Capacity 15-25 kW

Component Specifications

Definition

A specialized cooling system integrated into paper machine reel spools that circulates temperature-controlled fluid through internal channels within the shaft to maintain optimal operating temperatures, preventing thermal deformation that could compromise paper roll uniformity and winding precision during high-speed production.

Working Principle

Utilizes forced circulation of cooling fluid (typically water or glycol mixture) through internal axial channels within the shaft structure. Heat transfer occurs via conduction from the shaft material to the circulating fluid, with temperature regulation controlled by external heat exchangers and flow control systems to maintain shaft within specified thermal operating range.

Materials

Stainless steel (AISI 316L) shaft body with corrosion-resistant internal tubing, food-grade polymer seals, copper-nickel alloy heat transfer surfaces where applicable.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Flow Rate	40-80 L/min
Pressure Rating	6-10 bar
Cooling Capacity	15-25 kW
Temperature Range	10-40°C
Shaft Diameter Compatibility	150-400 mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 12100, ISO 13849-1, DIN 8601

Parent Products

This component is used in the following industrial products

Paper Machine Reel Spool

The Paper Machine Reel Spool is a critical component located at the end of the paper machine's production line.

View Product Details

Engineering Analysis

Risks & Mitigation

Cooling fluid leakage contaminating paper product
Insufficient cooling causing shaft thermal expansion
Corrosion in cooling channels reducing efficiency

FMEA Triads

Trigger: Seal degradation or improper installation
Failure: Coolant leakage into paper production area
Mitigation: Regular seal inspection and replacement schedule, use of double mechanical seals with leak detection

Trigger: Pump failure or flow restriction
Failure: Inadequate cooling leading to shaft overheating
Mitigation: Redundant pump systems, flow sensors with automatic alarms, regular filter maintenance

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Shaft temperature variation ±2°C from setpoint during steady operation

Test Method

Thermal imaging verification, flow rate measurement, pressure decay testing for leak detection

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Shaft Cooling System

Manufacturer profiles associated with Shaft Cooling System.

Sourcing Shaft Cooling System from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Approach Pipe Connection

A precision connection component in paper machine headboxes that distributes pulp slurry uniformly to the forming section.

Frequently Asked Questions

What is the primary function of a shaft cooling system in paper machines?

To prevent thermal expansion of the reel spool shaft during continuous operation, ensuring consistent paper tension and preventing defects in the wound paper roll.

How often does the cooling fluid need replacement?

Typically every 6-12 months depending on water quality and system usage, with regular monitoring of pH and conductivity recommended monthly.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Shaft Cooling System