Network Switch
View system integration details
This page explains how Management Interface is classified within Computer, Electronic and Optical Product Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.
A hardware or software interface that enables configuration, monitoring, and control of a network switch.
Technical details and manufacturing context for Management Interface
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Port Density | 8–48 ports | Number of ports per switch |
| Switching Capacity | 16–1760 Gbps | Total switching bandwidth |
| Forwarding Rate | 11.9–1310 Mpps | Packet forwarding throughput |
| Latency | 2–10 μs | Store-and-forward latency |
| Operating Temperature | -40–85 °C | Extended temperature rangeIEC 60068-2-1/2 |
| Storage Temperature | -40–95 °C | Non-operating storageIEC 60068-2-1/2 |
| Relative Humidity | 5–95 % | Non-condensingIEC 60068-2-78 |
| Ingress Protection | IP30–IP65 | Higher for industrialIEC 60529 |
| Input Voltage | 9–36 V DC | Wide range for industrial |
| Power Consumption | 10–120 W | Depends on port count |
| MTBF | 100000–500000 h | Reliability indicatorTelcordia SR-332 |
| Weight | 0.5–10 kg | Rack-mount units heavier |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
| pressure: | N/A (electronic device) |
| other spec: | Humidity: 10% to 90% non-condensing, Power: 100-240V AC, 50-60Hz |
| temperature: | 0°C to 50°C (operating), -40°C to 70°C (storage) |
Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.
Quoted from the published standard.
A practical evidence checklist for RFQ preparation and supplier evaluation.
Compare the published product scope and source details, then include your specifications and quantity in an enquiry.
2 companies list this product among what they make. Company figures are quoted from each company's own website; every card states where the relationship came from.
Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.
Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.
The management interface is a hardware or software interface that allows administrators to configure, monitor, and control the switch. It can be a dedicated port (console, out-of-band) or an in-band network connection using protocols like SNMP, SSH, or a web GUI.
Typical parameters include port density (8–48 ports), switching capacity (16–1760 Gbps), forwarding rate (11.9–1310 Mpps), latency (2–10 μs), operating temperature (-40–85 °C), storage temperature (-40–95 °C), relative humidity (5–95% non-condensing), ingress protection (IP30–IP65), input voltage (9–36 V DC), power consumption (10–120 W), MTBF (100,000–500,000 hours), and weight (0.5–10 kg). These are reference ranges; verify with the manufacturer.
It provides a communication channel (dedicated port or in-band) that runs management protocols. It interprets administrator commands or GUI inputs, translates them into configuration instructions for the switch's hardware and software, and returns status data. It supports remote access via SNMP, SSH, and HTTP/HTTPS.
Verify model-specific values for parameters like port density, switching capacity, operating temperature, and standards such as IEC 60068-2-1/2, IEC 60068-2-78, IEC 60529, and Telcordia SR-332. Always confirm with the legal manufacturer or supplier.
This component is essential for the following industrial systems and equipment:
Commonly used trade names and technical identifiers for Management Interface.
Editorial classification, named public sources where available, and source-reviewed manufacturer records.
Compare manufacturer profiles with relevant product and process capability.